Page History

You can launch the network use the Network settings utility to specify:

• IP address or DNS name of the router if the server is behind NAT,
• port range for operation of the Axxon One server,
• a mask/masks of available servers in the list of Axxon One servers.

To configure network settings, do the following:

1. Start the Network settings utility from the Windows Start menu: Start →

...

1. All Programs → Axxon One → Utilities → Network settings.
   

...

1. Info
   title Note
   The

...

1. NTServiceOpts.exe executable file of the Network settings utility is located in the <Axxon One installation folder>\AxxonSoft\Axxon One\bin\ folder.

   As a result, the NTServiceOpts registry setting window opens:
   Image Added
   

   Info
   title Note
   In Linux OS, you can perfom actions in this utility using the command (see Changing the configuration of the Axxon One Server in Linux OS): Code Block language bash sudo dpkg-reconfigure axxon-one

2. In the External IP address of router field, enter
Set
3. the external IP address or DNS name of the router if the Server is located behind
the 
4. NAT
(1)
5. .
 
6. 
   

   Info
   title Note
   You

may set multiple interfaces using a comma separated list, such as

7. can specify multiple interfaces in the following format: "IP Address1 or DNS Name1, IP address2 or DNS Name2". For example: 88.78.12.33, ExampleAxxon.ddns.net.

Set
8. Specify the port range
for operation
9. for operation of the Axxon One
Server (2-3). To do this, specify the beginning of the range and
10. server:
    1. In the Base port field, enter the start port of the range.
    2. In the Number of ports field, enter the number of ports in the range. The minimum possible number of ports
should not be lower than
11. 1. in the range is 20.
 
12. 1. 
       

       Note
       title Attention!

Within an Axxon Domain, the

13. 1. The port ranges of

Servers should

14. 1. domain servers must not overlap.

info

title	Note

16. 1. The number of ports that you select

affects

17. 1. determines the

scalability

18. 1. maximum operating configuration of the system.

Keep the following in mind when

19. 1. When specifying the number of ports, refer to the following information: Number of ports Purpose 6

ports

20. 1. Used for Axxon One operation (see Ports used by Axxon One) 6 Used

 is a minimum system requirement for machines with Axxon One.In a 64-bit configuration,

21. 1. for any number of cameras

, 6 ports are required.
22. 2 ports are required to write to the archive.
23. To use the Object Tracking database (track recording), 1 port is required.
24. To use basic detection tools, 2 ports are required.
25. To use Scene Analytics, 2 ports are required.
26. To use E-mail- (through SMTP) or server audio notification 1 port is required .

27. 1. in 64-bit configuration (see The Camera object) 2 Used to record to the archive (see Configuring recording to an archive) 1 Used to use the metadata database (see Metadata database) 2 Used to use the Service detectors (see Category: Service) 2 Used to use the standard sub-detectors (see Standard sub-detectors) 1 Used to use E-mail notification (via the SMTP service, see The Email notifier object) or server audio notification (see The Speaker object)

Restrict the visibility of Servers from various networks in the Servers list during the Axxon One setup (4
28. In the Interface mask field, enter a mask/masks of available servers in the list of Axxon One servers (see The Server object
29. ). Possible values:
    "
    • • 0.0.0.0/0
    " −  servers
    • • —servers from all networks
    will be visible
    • • are available.
    ""
    • • 10.0.1.23/32,192.168.0.7/32
    " − only Servers from specified networks will be visible.
    • • —only servers from the specified networks are available.
    • • 127.0.0.1
    " − only Servers
    • • —only servers from the local network
    will be visible.
    • • are available.
    • Click the Save button.
      

      Info
      title Note
      To close the NTServiceOpts registry setting window, click the Image Added button.

Configuration of the network settings is complete. The Axxon One server restarts automatically (see Launching and closing Axxon One)After you save the settings, the Server will be restarted.