Page History

...

1. Start the Network settings utility from the Windows Start menu: Start → All Programs → Axxon One → Utilities → Network settings.
   

   Info
   title Note
   The NTServiceOpts.exe executable file of the Network settings utility is located in the <Axxon One installation folder>\AxxonSoft\Axxon One\bin\ folder.

   As a result, the NTServiceOpts registry setting window opens:
   
   

   Info
   title Note
   In Linux OS, you can perfom actions in this utility using the command (see Changing the configuration of the Axxon One Server in Linux OS): Code Block language bash sudo dpkg-reconfigure axxon-one

2. In the External IP address of router field, enter the external IP address or DNS name of the router if the Server is located behind NAT.
   

   Info
   title Note
   You can specify multiple interfaces in the following format: "IP Address1 or DNS Name1, IP address2 or DNS Name2". For example: 88.78.12.33, ExampleAxxon.ddns.net.

3. Specify the port range for operation of the Axxon One server:
   1. In the Base port field, enter the start port of the range.
   2. In the Number of ports field, enter the number of ports in the range. The minimum possible number of ports in the range is 20.
      

      Note
      title Attention!
      The port ranges of domain servers must not overlap. The number of ports that you select determines the maximum operating configuration of the system. When specifying the number of ports, refer to the following information: Number of ports Purpose 6 Used for Axxon One operation (see Ports used by Axxon One) 6 Used for any number of cameras in 64-bit configuration (see The Camera object) 2 Used to record to the archive (see Configuring recording to an archive) 1 Used to use the metadata database (see Metadata database) 2 Used to use the Service detectors (see Category: Service) 2 Used to use the standard sub-detectors (see Standard sub-detectors) 1 Used to use E-mail notification (via the SMTP service, see The Email notifier object) or server audio notification (see The Speaker object)

4. In the Interface mask field, enter a mask/masks of available servers in the list of Axxon One servers (see The Server object). Possible values:
   • 0.0.0.0/0—servers from all networks are available.
   • 10.0.1.23/32,192.168.0.7/32—only servers from the specified networks are available.
   • 127.0.0.1—only servers from the local network are available.
5. Click the Save button.
   

   Info
   title Note
   To close the NTServiceOpts registry setting window, click the button.

Configuration of the network settings is complete. The Axxon One server restarts automatically (see Launching Starting and closing stopping Axxon One software).