Page History

In order to configure minimum required settings which allow communication between Vauban VERSO Visor server and Axxon One, you may do the following:

1. Run the Visor app with administrator's priviliges and select a language.
   Image Modified
2. Select the desired installation. Alternatively, create a new one:
   1. Select Single-station installation as the installation type.
      Image Modified
   2. Specify the name of your installation
   3. If necessary, specify the location of the database. Otherwise, the default location will be used.
      Image Modified
      

      Info
      title Note
      Please ensure that VISOR has read and write access to the directory.

   4. Select the reader type. This will lock the type of readers for all units and extension modules in the installation.
      Image Modified
      

      Info
      title Note
      In case where "The ACCESS component is not installed on your PC" error appears during installation, you may try the following: Uninstall Microsoft Access Runtime 2013 (if present). Download and install AccessRuntime_x86.exe from the official Microsoft page: https://www.microsoft.com/en-us/download/details.aspx?id=39358

 

3. 1. .

4. Open the installation. If the installation is opened for the first time. VISOR with ask to set up the Administrator manager password:
   Image Modified
5. Create and configure a Central unit. Do the following:
   1. Go to Technical tab. On the list, select both Site configuration, and Equipment status.
      Image Modified
   2. Select Central units with the right mouse button, and then select Create a Central Unit option.
      Image Modified
   3. In the newly displayed window, the module configuration options will appear. 
      Image Modified
   4. If your controller is connected to the local network together with the computer on which Visor is installed, you can select Search to find and add new devices.
      Image Modified
   5. In the Operating mode tab, define the way readers should be assigned to doors.
      Image Modified
      

      Info
      title Note
      After the controller is added to the system, the current status of the device will start being reported: Image Modified The preview of live events will be shown below: Image Modified

   6. If it is necessary to edit event configuration, open the Tools tab at the top of the screen; then select Event configuration option.
      Image Modified
      A window will be shown, listing all the events defined in the Vauban system.
      Image Modified
      
      
6. Configure the Web server, which will be used to communicate with Axxon One. Do the following:
   1. Open the Favourites window.
      Image Modified
   2. Go to the External connections tab.
      Image Modified
   3. Make sure that the Enable web server is checked.
   4. Set up IP port which will be used for communication with the Axxon One server.
   5. Select the Authentication mode. 
      

      Info
      title Note
      If Highly Secure or Very Highly Secure mode is chosen, you will need to enter your login and password in the configuration on the Axxon One side in order for the communication to be possible.

   6. If you choose to keep IP filtering enabled, add the IP address of the Axxon One server to the list of autorized IP addresses.

Configuration of the minimum required settings which allow communication between Vauban VERSO Visor server and Axxon One is complete.

For more details regarding the operation of Vauban VERSO Visor, please refer to the manufacturer's documentation.