Page History

You have to create and set up configure a cyclical Cycle rules macro (see see General information about macros) as followsto automatically copy protected videos to a separate archive:

First
1. The first action in the macro must be
the Awaiting (1)
2. Wait for timeout.
   Image Modified
The timeout delay value sets the time interval for checking
3. In the Timeout field, specify the periodicity of checking an archive for protected records
(2)
4. .
5. The second action in the macro must be
checking archive for
6. Check protected records
(3). Do
7. in archive. In this action, do the following:
   Select
   1. 1. In the Camera field, select a camera or a group of cameras, the archive of which must be checked for protected records
   (4)
   2. 1. .
      2. If you select a
   particular camera
   3. 1. specific camera, in the Record to field, specify the archive
   to be checked (5)
   4. 1. that you want to check for protected records. If you select a group of cameras
   was selected
   5. 1. in the previous step, only the default archive
   will be checked for each of them (see
   6. 1. is checked (see Configuring the default archive). 
   Specify
   7. 1. In the Depth of check field, specify the depth of
   the
   8. 1. check in HH:MM:SS format
   (6)
   9. 1. . The time interval between checks is calculated as follows: [starting time of the earliest recording in an archive, starting time of the earliest recording in an archive + depth of
   the
   10. 1. check].
       2. Add
   data
   11. 1. Start replication as
   a conditional action upon discovery of protected records within the scanning interval (7,
   12. 1. an action that must be performed when there are protected videos within the check interval (see Start replication). 
       2. Select During as the
   Replication time for a time interval (8). The replication duration defines
   13. 1. replication period. Replication duration determines the time interval from which protected records
   have to be
   14. 1. are copied to another archive. All protected intervals starting within the [starting time of the earliest recording in an archive; starting time of the earliest recording in an archive + replication duration]
   range will be
   15. 1. interval are copied to the replication archive
   for replication
   16. 1. .
   Normally
   17. 1. In general cases, the replication duration
   has to
   18. 1. must be
   equal to the depth of the check defined in step 3c
   19. 1. the same as the Depth of check parameter. 

   The screenshot shows the settings that make the system scan once in a minute (2) check for protected records in Camera 4's (4) 1. Camera in the archive AliceBlue (5) within the [starting time of the earliest recording in archive + 10 minutes] time interval (6). If there are protected records in this interval contains protected records, the replication will be launched to copy replication starts, and all protected records falling into , the start of which is in the [starting time of the earliest recording in an archive; starting time of the earliest recording in an archive + 10 minutes] (8) interval, are copied to the replication archive specified for replication.