Page History

...

• Video and audio streams are not combined for the discovered devices. For example, if there is a USB camera with a microphone, two devices are discovered—one video-only device and one audio-only device.
• In order to make a single device with both audio and video streams, manually edit the IP address field on the settings panel of the Video capture device object. To specify the audio device, enter its name with a colon after the name of the video device. See also Advanced settings for the FFMPEG device below.
• Both video and audio devices can be unavailable. For example, if you specify the device address as dshow://:Internal Microphone (Conexant ISST Audio), a device without video but with audio is available.

...

To add the Video capture device object to receive video and audio via RTSP and RTMP protocols using the Dshow device (USB camera) model, do the following:

1. Start the Camera discovery tool.
   
   
2. In the Model list (3), select Dshow device (USB camera).
3. In the Firmware list (4), select auto.
   As a result, the discovered devices are displayed in the FFMPEG list (2). If the required device isn't discovered, proceed to the next step. If the device is discovered, proceed to step 5.
   
4. Click the Search button (1) and wait for the repeat discovery to complete.
   If necessary, you can add the device manually by Creating and configuring the Video Capture Device object. For the device address format, see Advanced settings for the FFMPEG device below.
5. In the Settings list (5), select:
   1. Video server settings, if you want to send the settings specified in Axxon PSIM to the camera when you add it.
   2. Device settings, if you want to use the device settings.
6. Enter login (6) and password (7) to to connect the FFMPEG device. The login and password are specified in the documentation of the network device that you connect. Usually these fields must be left blank.
7. Check if the TCP/IP port (8) is correct. If necessary, enter the required value in the field.
8. Select the objects that you want to create on the basis of the FFMPEG device by setting the corresponding checkboxes (9).
   

   Info
   title Note
   For more information, see Camera discovery tool.

9. Click the Apply button (10) for one device or the Apply button (11) if several devices are selected.
   The selected objects are automatically created in the object tree on the Hardware tab.
10. Click the Exit button (12) to close the Camera discovery tool window.

...