Page History

General information

...

You can create and configure archives on the Archive tab. To create archives, you must have appropriate permissions (see Roles). You can create an unlimited number of archives on the basis of one server.

When you select the Server object on the Archive tab, the following information is displayed:

Section	Field

...

Description

...

Server archives allocation

...

	Archives GB	Displays the percentage of used space of created archive volumes
	Disks size GB	Displays the total amount of disk space in the system, including both used and free space on all available disks
	Available GB	Displays the amount of free space on a disk
Partitions information	Disk	The

...

section displays: a list of available disks, a total used disks space, a total free disks space, a total size of each disk, used disk space, free disk space
Default archives	Camera	Specifies the archiving settings for the cameras in the system. The section specifies which cameras are used by default to create archives, and sets the parameters for storing and managing the data received from these cameras

When you select the the Archive object, the following information is displayed:

Image Modified

1. The Partitions information section displays the percentage of the filled archive volume. This parameter allows you to track the moment when the volume overwriting starts. If the volume is 100% full, it means that the new data is written over the old data (see Statuses of archive volumes).
2. The Filled archive volume field in the Archive parameters section displays the approximate volume of filling of the entire archive in percent and gigabytes.

...

• When you create an archive with block or object storage type as a file, note that the disk must not be completely full completely. For the correct operation of the system, it is necessary to leave some space free. General recommendations for arranging free space:
  

  Info
  title Note
  When you create a local archive with block storage type as a partition (logical disk), the disk can be filled completely.

  • If archive size is less than 1 TB, you need about 100 MB of free space.
  • If archive size is between 1 TB and 10 TB, you need about 1 GB of free space.
  • If archive size is larger than 10 TB, you need about 10 GB of free space.
• For archives with object storage type, we do not recommend placing archive volumes or archives on the same physical device. If placing several archives on one physical disk is unavoidable, free space must be N times larger than the volume of all archives (N is the number of archives). We recommend splitting the archive into several volumes and placing them on different physical devices to improve the reliability and performance of storage. 
• We recommend creating archive volumes of no more than 30 TB each.

...