...
- Select the Camera object in the Hardware tab (see Camera).
- Set the value in the Panomorph view parameter group:
Parameter Value Description Panomorph view Activate Yes By default, panomorph view is disabled. To enable it, select the yes value No Camera position Wall Select camera position
Note title Attention! Some functions and features of the system depend on the selected camera position: digital video zooming, display of video in the surveillance sector on the map, and immersion mode.
Ceiling Floor Lens type Common fisheye-lens If you use a fisheye camera, select the Common fisheye-lens lens type
Info title Note - The types of device lenses certified by ImmerVision are listed in the document.
- You cannot select ImmerVision lenses in Linux.
Double sphere fisheye lens When using double-sphere XingYun devices, select the Double sphere fisheye-lens type.
A0**V If it is you use a video camera with a panomorph lens, select the corresponding type.
A1UST A8TRT B0QQV B4QQV B5SST B6SST B72YV B8QQT B9VVT C1ZZV C2TTV C322V C4VVV C7SST C8WWT C9VVT D1SST D2WWV D4SST D9SSV E3VVV View type PTZ If you use a camera with an Immervision lens, select the appropriate display mode: 360о panorama with virtual PTZ (PTZ value) or 180о panorama (Perimeter).
Perimeter Fit to frame Yes By default, the parameter is disabled. A typical fisheye lens with standard settings produces a skewed image in the upper part of the screen. In this case, you must perform the calibration of the video image. To do this, select the yes value. As a result, the video image is automatically calibrated and cut at the edges of the frame, which can result in a significant loss of frame area.
Note title Attention! If there are multiple streams from a camera, you must calibrate each stream. To do this, before applying the settings, switch the stream tab in the Surveillance window (see Camera).
Video is calibrated every time you change any parameters in the Panomorph group.
No
...