Page History

Create To create and configure the Camera object as follows, do the following:

1. In the context menu of the Video capture device object, select Create object → Camera.
   

2. As a result, the basic settings panel of the object will be is displayed.
   Image Added

   Info
   title Note
   Basic settings are specified set automatically. It is possible to If necessary, you can change the ID, object name, and parent object.

   Image Removed

3. Click the Apply button to create the object.
4. In the objects tree (1), select the created created Camera object.
   
5. Configure the created object:
   

   1. In the From the Channel number list (2), select a physical video output of the card to which the camera is connected (see Features of video subsystem configuration).

      Info
      title Note
      Channel numbers within one Video capture device object must not mustn't be repeated.

   2. In the Resolution list (3), select the resolution with which the video signal will be is captured: Standard—minimum accepted allowable value for the card, High—mean value—average value, and Full—maximum accepted allowable value.

      Note

      Info
      title Note
      title	Resolutions supported by video capture cards are given in Appendix 4. Technical specifications of video capture cards. When configuring the video camera, which is connected through via the SC590N4 video capture card, in Axxon PSIM, you must set the frame resolution should be set as equal to the resolution set on the video camera. Otherwise, artifacts can appear on the video image. If you are using the Stretch VRC-6404 HD video capture card is used , then make sure to restart Axxon PSIM after changing whenever you change the resolution.
      Info
      Changing the Resolution doesn't guarantee that the resolution of the received video signal will change changes, as it depends, among other things, on the internal settings of the camera itself. If you need to specify certain streams strictly, it is better to to configure multistream multistreaming video.

   3. Click the Apply button to save the changessettings.

Configuring the Camera object is completedcomplete.

Repeat these the steps described in this section for all cameras connected to the card.