Versions Compared

Old Version 6

changes.mady.by.user Bahdan Tsiulkou

Saved on

compared with

New Version 7

changes.mady.by.user Bahdan Tsiulkou

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Axxon PSIM software provides an audio and video synchro recording option.

...

To use the synchro recording option, you must configure the Axxon PSIM software audio subsystem properly. For information on how to configure an audio subsystem in Axxon PSIM, refer to the Configuring audio subsystem section.

Note
titleAttention!

If you create a camera and microphone based on different Computer objects (for example, Server/RAW and Client) that are configured for synchronous video and audio recording, then synchronous audio recording is performed only if there are disks for archive recording with identical letters on both computers (see also Selecting the disks for audio archive storage and Selecting the disks for video archive storage).

...

  1. Go to the Hardware tab in the System settings window.
  2. In the the objects tree on the Hardware tab, select the Camera object corresponding to the adjusted camera in the objects tree.
  3. Go to the Basic settings tab on the settings panel of the Camera object.
  4. In the Recording audio table from the Number dropdown list, select the ID of the microphone set for synchro recording when registering it in Axxon PSIM. After this, the name of the selected Microphone object is automatically displayed when clicking on any area of the Microphone field in the table.
  5. To perform synchro audio recording from two microphones, repeat steps 4-5 for the second microphone.
    Info
    titleNote

    Audio from two microphones is recorded to one stream.

  6. Click the Apply button.

Configuring the camera and microphone for synchro video and audio recording is complete.

...