Versions Compared

Old Version 13

changes.mady.by.user Gleb Matskevich

Saved on

compared with

New Version 14

changes.mady.by.user Bahdan Tsiulkou

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

To configure the Privacy masking detector, do the following:

  1. Go to the Detection ToolsDetectors tab.

  2. Below the required camera, click Create… → Category: Trackers → Privacy masking.

By default, the detection tool detector is enabled and set to hide stationary objects.

If necessary, you can change the detection tool detector parameters. The list of parameters is given in the table:

other will carry the will be detection tool
ParameterValueDescription
Object features
Record mask to archiveYesBy default, mask is the mask is recorded to the archive. To disable the parameter, select the No value
No
Video streamMain stream

If the camera supports multistreaming, select the stream for which detection is needed. Selecting a low-quality video stream reduces the load on the Serverserver.

Note
titleAttention!

To ensure the correct display of streams on a multi-stream camera, all video streams must have the same frame aspect ratio.

Other
EnableYesBy default, the detection tool detector is enabled. To disable, select the No value
No
NamePrivacy maskingEnter the detection tool detector name or leave the default name
Number of frames processed per second25Specify the number of frames for the detector to process per second. For sub-detectors to work correctly, the Privacy masking detector must analyze frames at least every 0.5 seconds. The value must be in the range [0.016, 100].
Decoder modeAutoSelect a processing resource for decoding video streams. When you select a GPU, a stand-alone graphics card takes priority (when decoding with Nvidia NVDEC chips). If there is no appropriate GPU, the decoding will use the Intel Quick Sync Video technology. Otherwise, CPU resources will be are used for decoding
CPU
GPU
HuaweiNPU
TypePrivacy MaskingName of the detection tool type detector type (non-editable field)
Basic settings
Detection threshold15Specify the Detection threshold for objects in percent. If the recognition probability falls below the specified value, the data will be is ignored. The higher the value, the higher the sensitivity to recognizing and masking objects. The value must be in the range [5, 100]
Neural network mode





CPU

Select a processing resource for neural network operation (see Hardware requirements for neural analytics operation, Selecting Nvidia GPU when configuring detection tools).

Note
titleAttention!
  • If you specify
  • another processing resource than the CPU, this device
  • carries most of the computing load. However, the CPU
  • is also
  • used to run the



 

 

 

 

 

Nvidia GPU 0
Nvidia GPU 1
Nvidia GPU 2
Nvidia GPU 3
Intel NCS  (not supported)
Intel HDDL (not supported)
Intel GPU
Intel Multi-GPU
Intel GPU 0
Intel GPU 1
Intel GPU 2
Intel GPU 3
Huawei NPU
Neural network filter
Neural networkYesBy default, the parameter is disabled. The detection tool detector works on the basis of an algorithm without a neural network, ignoring the value specified in the Neural network file parameter. If the detection tool detector cannot correctly detect an object in the frame, select the Yes value. In the Neural network file parameter, select a custom neural network that is a privacy mask neural network. A detection tool detector with a neural network algorithm based on this neural network will be is created
No
Neural network file

If you use a custom neural network, select the corresponding file.

Note
titleAttention!
  • To train your neural network, contact AxxonSoft (see Data collection requirements for neural network training).
  • If If  you don't specify the neural network file is not specified, the default file will be is used that is selected automatically depending on the selected processor for the neural network operation (Decoder mode). If you use a custom neural network, enter a path to the file.To ensure the correct operation of the neural network in Linux OS, the corresponding file must be located in the /opt/AxxonSoft/DetectorPack/NeuroSDK directory. 
  • If you use a standard neural network (training wasn't performed in operating conditions), we guarantee
    • the
  • an overall accuracy of 80-95% and
    • the
  • a percentage of false positives of 5-20%. The standard neural networks are located in the C:\Program Files\Common Files\AxxonSoft\DetectorPack\NeuroSDK directory.
  • You cannot specify the network file in Windows OS. You must place the neural network file locally, that is, on the same server where you install Axxon One.
  • For correct neural network operation on Linux OS, place the corresponding file locally in the /opt/AxxonSoft/DetectorPack/NeuroSDK directory or in the network folder with the corresponding access rights.
 

By default, the entire frame is a detection area.If necessary, in the preview window, set:

Info
titleNote
  • For convenience of configuration, you can "freeze" the frame. Click the Image Modified button. To cancel the action, click this button again.
  • The detection area is displayed by default. To hide it, click theImage Modified button. To cancel the action, click this button again.

To save the parameters of the detection tooldetector, click the Apply  button. To cancel the changes, click the Cancel  button.

Configuration of the Configuring the Privacy masking is complete. 

Image Modified

Note
titleAttention!

Correct We don't guarantee the correct operation of the detection tool isn't guaranteed before detector earlier than 10 minutes from the moment of its creation or making any changes in the detection tool detector settings.