Versions Compared

Old Version 17

changes.mady.by.user Gleb Matskevich

Saved on

compared with

New Version 18

changes.mady.by.user Bahdan Tsiulkou

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

To configure the Fire detector, do the following:

  1. Go to the Detection Tools tab Detectors tab.
  2. Below the required camera, click Create… → Category: Production Safety → Fire detector.

...

If necessary, you can change the detector parameters. The list of parameters is given in the table:

other will carry the will be
ParameterValueDescription
Object features
Record mask to archiveYesBy default, the sensitivity scale of the detector is recorded to the archive (see Displaying information from a detector (mask)). To disable the parameter, select the No value
No
Video streamMain streamIf the camera supports multistreaming, select the stream for which detection is needed. Selecting a low-quality video stream reduces the load on the Serverserver
Other
EnableYesThe detector is enabled by default. To disable the detector, select the No value
No
NameFire detector
Enter the detector name or leave the default name
Decoder modeAutoSelect a processing resource for decoding video streams. When you select a GPU, a stand-alone graphics card takes priority (when decoding with NVIDIA NVDEC chips). If there is no appropriate GPU, the decoding will use the Intel Quick Sync Video technology. Otherwise, CPU resources will be are used for decoding
CPU
GPU
HuaweiNPU
Number of frames processed per second0.1Specify the number of frames that the detector will process per second. The value must be in the range [0.016; , 100]
TypeFire detector
Name of the detector type (non-editable field)
Advanced settings
Neural network file

Select a neural network file. The standard neural networks for different processor types are located in the C:\Program Files\Common Files\AxxonSoft\DetectorPack\NeuroSDK directory. You don't need to select the standard neural networks in this field, the system will automatically select the required one. If you use a custom neural network, enter a path to the file.

Infonote
titleNoteAttention!
  • You cannot specify the network file in Windows OS. You must place the neural network file locally, that is, on the same server where you install Axxon One.
  • For
For the
  • correct neural network operation on Linux OS, place the corresponding file locally in the /opt/AxxonSoft/DetectorPack/NeuroSDK directory
. 
Note
titleAttention!
  • or in the network folder with the corresponding access rights.
  • If you use a standard neural network (training wasn't performed in operating conditions), we guarantee the overall accuracy of 80-95% and the percentage of false positives of 5-20% (see Data collection requirements for neural network training).
Ignore black and white imageYesThe parameter is disabled by default. If you don't want the detector to generate an event when the image is black and white, select the Yes value
No
Number of measurements in a row to trigger detection5

Specify the minimum number of frames with fire for in which the detector must detect fire to generate an event. The value must be in the range [5; , 20]

Scanning modeYesThe parameter is disabled by default. You can use the scanning mode (see Configuring the scanning mode) to detect small objects or or objects in areas far away from the camera (see Configuring the scanning mode). For this, select the Yes value. This mode doesn’t provide absolute detection accuracy , but can improve detection performance
No
Basic settings
Mode







CPU

Select a processor for the neural network operation (seeHardware requirements for neural analytics operation, Selecting Nvidia GPU when configuring detectors). 

Note
titleAttention!
  • another processing resource than the CPU, this device
  • carries most of the computing load. However, the CPU
  • is also
  • used to run the detector.
  • Starting with Detector Pack 3.11, Intel HDDL and Intel NCS aren’t supported.
  • Starting with Detector Pack 3.14, Intel Multi-GPU and Intel GPU 0-3 are supported.









Nvidia GPU 0
Nvidia GPU 1
Nvidia GPU 2
Nvidia GPU 3
Intel GPU
Intel NCS (not supported)
Intel Multi-GPU
Intel GPU 0
Intel GPU 1
Intel GPU 2
Intel GPU 3
Intel HDDL (not supported)
Huawei NPU
Sensitivity 33

Specify the sensitivity of the detector empirically. The value must be in the range [1

;

, 99]. The default value is 33. The preview window displays the sensitivity scale of the detector that relates to the sensitivity parameter. If the scale is green, fire isn't detected. If the scale is yellow, fire is detected, but not enough to generate an event. If the scale is red, fire is detected, and the detector generates an event

,

if the scale is red through the sampling period (50 seconds by default).

Example.

Info
titleNote

The sensitivity parameter value of 40 means that the detector will generate an event when the scale has at least four divisions full over the entire detection period. An event will end when the scale has less than two divisions full over the detection period. The detector will generate an event again if the scale has at least four divisions full over the entire detection period.

By default, the entire frame is the detection area. In the preview window, you can specify the detection areas using the anchor points (see Configuring a detection area):

  1. Right-click in the preview window.
  2. If you want to specify the detection area by one or more rectangles, select Detection area (rectangle). If you specify a rectangular area, the detector will analyze only this area. The rest of the frame will be is ignored.
    Image RemovedImage Added
  3. If you want to specify the detection area by one or more polygons, select Detection area (polygon). If you specify one or several polygonal areas, the detector will analyze the entire frame. The part of the frame not included in the specified polygons will be is blacked out.
    Image Modified
    Note
    titleAttention!

    You must select the detection area (polygon or rectangle) experimentally. For some neural networks, the quality of detection will be better with rectangle, for others—with a polygon.

Info
titleNote
  • For convenience of configuration, you can "freeze" the frame. Click the  button. To cancel the action, click this button again.
  • To hide the detection area, click the  button. To cancel the action, click this button again.
  • To delete the selected area, click the  button.

To save the parameters of the detector, click the Apply  button. To cancel the changes, click the Cancel  button.

Configuring the Fire detector is complete.