Go to documentation repository
Page History
The settings panel of the SIP-terminal system object is shown in the figurefigures below.
Table The table describes the setting parameters of the SIP-terminal system object.
№ | Parameter | Method for setting the parameter value | Description | Representation | Default value | Value range |
1 | Identification number* | Automatically | Displays the identification number of the SIP-terminal system object | Numbers, letters, periods, hyphen, dash, and underscore | -NA | Depends on the number of the SIP-terminal objects in the system |
2 | Name* | Enter the value into in the field | Sets the name of the SIP-terminal object in the system | Latin, Cyrillic, and service characters | SIP-terminal | A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive. Number of characters—from 1 to 60 |
3 | Disable | Set the checkbox | Sets the state (enabled or disabled) of the Disables the SIP-terminal object in the system | Boolean type | Clear | Set—the SIP-terminal object is disabled and isn't used Clear—the SIP-terminal object is enabled and used |
4 | Computer | Select the value from the list | Sets the Computer parent object for the given SIP-terminal object | Name of the Computer objects registered in the system | Name of the Computer parent object | Depends on the number of the Computer objects in the system |
| 5 | Terminal type | Set the switch in the required radio buttonposition | Sets the SIP-terminal type | Supported SIP-terminal types | SIP server | SIP server—the SIP-terminal acts as a server, any SIP-clients can be connected to it SIP client—the SIP-terminal acts as a client, it can be connected to any SIP - server |
*Name of the element isn't displayed in the settings panel of the given object.
The The Basic settings tab.
Table The table describes the setting parameters of the Basic settings tab.
№ | Parameter | Method for setting the parameter value | Description | Representation | Default value | Value range |
| 1 | Network | Select the value from the list | Sets the IP address of the network adapter that will be is used to connect to the network in which the SIP-clients are located | IP address | Default network adapter | The list of the available network adapters of the computer |
| 2 | SIP port | Enter the value into in the field | Sets the port number which will receive the data from the clients via the SIP protocol | Sequence of Integer numbers | 5060 | From 0 –to 65535 |
| 3 | SIP transport | Select the value from the list | Sets the used transport layer protocol | Supported transport layer protocols | UDP | TCP UDP |
| 4 | RTP ports range, from and to fields | Enter the value into in the field | Sets the RTP ports range | Sequence of Integer numbers | from 40000 to 64000 | From 0 –to 65535 |
| 5 | Address | Enter the value into in the field | For the SIP client terminal type only. Sets the IP address of the SIP server | IP address | -NA | 1.0.0.0–—255.255.255.255 |
| Port | Enter the value into in the field | For the SIP client terminal type only. Sets the port for the SIP server connection | Sequence of Integer numbers | -NA | From 0 –to 65535 |
The Advanced settings tab.
Table The table describes the setting parameters of the Advanced settings tab.
№ | Parameter | Method for setting the parameter value | Description | Representation | Default value | Value range |
| 1 | Subscriber | Enter the value into in the field | Sets the SIP server special number | Sequence of Integer numbers | -NA | >=0 |
| 2 | Name | Enter the value into in the field | Sets the name of the SIP server special number | Latin, Cyrillic letters , numbers, and service characters | -NA | A line containing a sequence of any characters |
The Numbers settings tab.
Table The table describes the setting parameters of the Numbers settings tab.
№ | Parameter | Method for setting the parameter value | Description | Representation | Default value | Value range | ||
| 1 | Subscriber | Automatically | Displays the numbers of all devices and operators registered on the SIP-terminal, as well as special numbers- | NA | - | NA | Depends on the number of devices and operators registered on the SIP-terminal, as well as special numbers- | |
| 2 | Name | Automatically | Displays the names of the corresponding devices, operators, and special numbers | - | - | Latin, Cyrillic, numbers, and service characters | NA | A line containing a sequence of any characters- |
| 3 | Redirecting | Enter the value into in the field | Sets the number or numbers to which the corresponding subscriber's calls should must be forwarded to | Sequence of numbers | -NA | Numbers of all devices and operators registered on the SIP-terminal, as well as special numbers. If you want to specify several numbers, use a semicolon as a separator, for example, 234;12;0983 | ||
| 4 | Pending, s | Enter the value into in the field | Sets the time period in seconds , during which it is necessary to wait for a response from the subscriber | Sequence of numbers | -NA | >0 | ||
| 5 | One responder | Set the checkbox | Enables the reset of a group call ( forwarded to several numbers ) ending after one of the recipients answers | Boolean type | Clear | Set—a Set—a group call is ended reset for all recipients after the response of any operator or a device Clear—the Clear—the group call is not ended isn't reset after the answer of the first or subsequent operators and/or devices, i.e., that is, all recipients can join the call | ||
| 6 | Run macro | Select the value from the list | Sets the Macro object, which should must be run when calling the to subscribe | Name of the Macro objects registered in the system | -NA | Depends on the number of the Macro objects in the system | ||
| 7 | Calling number multicast (video) | Enter the value into in the field | Sets the IP address for transmitting the video stream from the calling device in the multicast Multicast mode | IP address | -NA | 1.0.0.0–—255.255.255.255 | ||
| 8 | Calling number multicast (audio) | Enter the value into in the field | Sets the IP address for transmitting the audio stream from the calling device in the multicast Multicast mode | IP address | -NA | 1.0.0.0–—255.255.255.255 | ||
| 9 | Destination number multicast (video) | Enter the value into in the field | Sets the IP address for transmitting the video stream from the destination device in the multicast Multicast mode | IP address | -NA | 1.0.0.0–—255.255.255.255 | ||
| 10 | Destination number multicast (audio) | Enter the value into in the field | Sets the IP address for transmitting the audio stream from the destination device in the multicast Multicast mode drop-down list | IP address | -NA | 1.0.0.0–—255.255.255.255 |
Overview
Content Tools