얼굴 감지는 다음과 같이 비디오 카메라가 설치되고 설정되었을 경우에 제대로 작동합니다.
- 프레임 속도는 최소 12 이상이어야 하며 출입 게이트에서 얼굴 인식을 위해서는 최소 6 이상이어야 합니다.
비디오 카메라로 촬영된 얼굴 사진의 정면 각도는 +/- 15°를 초과해서는 안 됩니다.
비디오 카메라로 촬영된 얼굴 사진에서 눈동자 사이의 거리는 최소 32픽셀 이상이어야 합니다.
사람들 간에 얼굴이 겹쳐 보이는 경우는 최소화되어야 합니다.
얼굴은 최소 200럭스 이상의 확산광으로 균일하게 조명되어야 하며 측면 방향 조명은 허용되지 않습니다.
촬영된 얼굴 사진의 명암 대비는 64단계 이상이어야 합니다. 조명이 너무 어둡거나 밝은 경우는 허용되지 않습니다.
역광 및 빛과 그림자의 급격한 변화가 없어야 합니다.
- 비디오 카메라로 촬영된 얼굴 사진은 선명해야 하며 움직임으로 인한 흐림이 없어야 합니다.
Info |
---|
|
필요한 카메라와 얼굴 사이의 거리는 적절한 초점 거리를 가진 렌즈를 사용하여 설정할 수 있습니다 |
Face detection works properly if video cameras are installed and set up as follows:
- The frame rate should not be less than 12 FPS and not less than 6 FPS for face recognition at turnstiles.
The maximum angle of frontal perspective of the photos of people’s faces received from video cameras should not exceed +/- 15°.
- The distance between the pupils on the photos of people’s faces received from video cameras should not be less than 32 pixels.
- Mutual faces covering should be minimal.
- Faces should be evenly illuminated with diffused light of at least 200 lux. Directional side lighting is not allowed.
- The contrast of the photos of the captured faces should be over 64 grayscale. Insufficient or excessive lighting is not allowed.
- There should be no backlighting and sharp gradients of light and shade.
- The photos of the captured faces received from video cameras should be clear. Image blurring caused by motion is not allowed.
Info |
---|
|
The required distance between the camera and the face can be set using a lens with the required focal length. |