Go to documentation repository
Page History
The
...
Connection section is used for setting up automatic connections between the client and backup video servers in case of
...
connection loss with the main server. In the
...
Connection section,
...
you must specify the network names and IP addresses of the backup video servers, as they aren't listed in the Windows registry by default.
The settings panel of the DNSthe Connection section is shown in the figure.
...
The table describes the setting parameters of the DNS the Connection section.
№ | Parameter name | Method for setting the parameter value | Parameter description | Representation | Default value | Value range |
1 | Allow unsafe transport checkbox | Set the checkbox | Enables the access to the use of an unsecured port (HTTP port) | Boolean type | Clear | Set—Operator can allow the use of an unsecured port Clear—the use of an unsecured port is prohibited |
2 | HTTP port field | Enter the value in the field. Note. The value is entered using the keyboard, or by using the up and down arrows | Sets the number of the unsecured port that will be used for data transmission Note. The field is inactive if the Allow unsafe transport checkbox isn't set | Positive integers | 22080 | NA |
| 3 | HTTPS port field | Enter the value in the field. Note. The value is entered using the keyboard, or by using the up and down arrows | Sets the number of the secured port that will be used for data transmission | Positive integers | 22433 | NA |
| 4 | Connection timeout (sec) field | Enter the value in the field | Sets the time in seconds after which the client automatically connects to the backup video servers in case of connection loss with the main server | Seconds | 10 | From 0 to 999999999 |
5 | System identifier field | Enter the value in the field | Sets the network name of the backup video server if the connection with the main server is lost | NA | NA | Depends on the network settings of the backup video server |
6 | IP address field | Enter the value in the field | Sets the IP address of the selected backup video server | IP address | NA | Depends on the network settings of the backup video server |
7 | Enable server selection menu checkbox | Set the checkbox | Enables the server |
selection menu. Note. You can connect several servers at once | Boolean type | Clear | Set—Operator can enable the server selection menu Clear—Operator cannot enable the server selection menu |
8 | Allow all names button | Click the button |
Adds automatically the computers' IP addresses, set in the System identifier column, to the IP address column if these IP addresses are enabled and identified | NA | NA | NA |
| Info | ||
|---|---|---|
| ||
To delete a specified server, select it in the list (click the row) and press Ctrl+Del on the keyboard. |
...
Overview
Content Tools