Page History

...

The table describes the parameters of the settings corresponding to the elements of the settings panel of the PTZ device object.

№	Parameter	Method for setting the parameter value	Parameter description	Representation	Default value	Value range
1	The Identification number* field	Automatically	Displays the identification number of the PTZ device object in the video surveillance system with the distributed architecture	NumbersDigits, letters, periods, hyphen, dash, and underscore	NA	Depends on the number of the PTZ device objects in the video surveillance system with the distributed architecture
2	The Name* field	Enter the value in the field	Sets the name of the PTZ device object in the video surveillance system with the distributed architecture	Latin alphabet, Cyrillic characters, digits and service characters	PTZ device	A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive. Number of characters—from 1 to 60
3	The Disable checkbox	Set the checkbox	Disables the PTZ device object in the video surveillance system with the distributed architecture	Boolean type	Clear	Set—the PTZ device object is disabled and isn't used Clear—the PTZ device object is enabled and is used
4	The Telemetry Controller drop-down list	Select the value from the list	Sets the Telemetry Controller parent object of the system with the distributed architecture to which the given PTZ device object belongs	Name Names of the PTZ device objects registered in the system	Name of the Telemetry Controller parent object	Depends on the number of the telemetry controllers in the video surveillance system with the distributed architecture
The Camera group
5	The Number drop-down list	Select the value from the list	Sets the identification number of the camera on which the PTZ device is installed	Sequence of numbers	NA	Depends on the number of video cameras in the video surveillance system with the distributed architecture
6	The Camera drop-down list	Select the value from the list	Matches the PTZ device with the camera where it is installed. The parameter is used by the Video video surveillance monitor and the Telemetry telemetry panel to control the PTZ devices of the cameras	Name Names of the Camera objects registered in the system	Clear	Depends on the number of the Camera objects in the video surveillance system with the distributed architecture
The Presets table
7	The Presets* checkbox	Set the checkbox	Selects the presets that must be displayed in the Telemetry telemetry control panel	Boolean type	Clear	You can use up to 355 presets. The maximum number depends on the device, see Appendix 6. Maximum number of presets for IP devices. Set—the preset name is displayed in the Telemetry telemetry control panel Clear—the preset name isn't displayed in the Telemetry telemetry control panel
7	The Name field	Enter the value in the field	Sets the name of the preset for displaying on in the Telemetry telemetry control panel	Latin alphabet, Cyrillic characters, and service characters	Preset	A line containing a sequence of any characters (letters, digits, service characters), case-insensitive
Out of the groups
8	The Select/Deselect checkbox	Set the checkbox	Sets/clears the checkboxes next to all elements in the Presets table	Boolean type	Clear	Set—select all presets Clear—clear the preset checkboxes from presets
The PTZ speed group
The Zooming group
9	The Min drop-down list	Select the value from the list	Sets the minimum possible speed of optical zoom on the PTZ device	Speed in standard relative units	1	From 1 —to 10
10	The Max drop-down list	Select the value from the list	Sets the maximum possible speed of optical zoom on the PTZ device	Speed in standard relative units	10	From 1 —to 10
The Mouse group
11	The Min drop-down list	Select the value from the list	Sets the minimum possible rotation speed of the PTZ devices from the Video video surveillance monitor	Speed in standard relative units	1	From 1 —to 10
12	The Max drop-down list	Select the value from the list	Sets the maximum possible rotation speed of the PTZ devices from the Video video surveillance monitor	Speed in standard relative units	10	From 1 —to 10
The Joystick group
13	The Min drop-down list	Select the value from the list	Sets the minimum possible rotation speed of the PTZ devices using the joystick	Speed in standard relative units	1	From 1 —to 10
14	The Max drop-down list	Select the value from the list	Sets the maximum possible rotation speed of the PTZ devices using the joystick	Speed in standard relative units	10	From 1 —to 10
The Point&Click group
15	The Min drop-down list	Select the value from the list	Sets minimum possible rotation speed of the PTZ device in the direction of the mouse click (Point&Click)	Speed in standard relative units	1	From 1 —to 10
16	The Max drop-down list	Select the value from the list	Sets maximum possible rotation speed of the PTZ device in the direction of the mouse click (Point&Click)	Speed in standard relative units	10	From 1 —to 10
Out of the groups
17	The Device address field	Enter the value in the field	Sets the address of the PTZ device installed via the hardware (with jumpers on the PTZ device board) or via the software (with special software for the PTZ device's firmware upgrade)	Sequence of numbers	1	Integer number from 1 to 255. Depends on the PTZ device protocol
18	The Force disabling continuous PTZ mode checkbox	Set the checkbox	Sets the PTZ control mode: continuous or discrete	Boolean type	0Clear	0Clear—the continuous PTZ control mode is enabled 1Set—the discrete PTZ control mode is enabled

*Name of the element isn't displayed in the settings panel of the given object.

The Calibration tab

Image Modified

№	Parameter	Method for setting the parameter value	Parameter description	Representation	Default value	Value range
191	The update button	Click the button	Displays the data of the current camera position in the the pan, tilt, zoom fields	NA	NA	NA
202	The pan field	Automatically when clicking you click the update button	Sets the panoraming of the PTZ device	Integer numbers	NA	Depends on the model of the connected PTZ device
213	The tilt field	Automatically when clicking you click the update button	Sets the tilt of the PTZ device	Integer numbers	NA	Depends on the model of the connected PTZ device
224	The zoom field	Automatically when clicking you click the update button	Sets the scaling (zooming) of the PTZ device	Sequence of numbers	NA	Depends on the model of the connected PTZ device
235	The x field	Enter the value in the field	Sets the X coordinate of the point on the map corresponding to the selected position of the camera	Integer numbers	NA	Depends on the map size
246	The y field	Enter the value in the field	Sets the Y coordinate of the point on the map corresponding to the selected position of the camera	Integer numbers	NA	Depends on the map size

...

Page tree

Versions Compared

Old Version 5

New Version Current

Key