Page History

The To configure the neurotracker track counter is configured as follows, do the following:

1. Go to the settings panel of the Track counter object
settings panel
2. , which is created on the basis of
the
3. the Neurotracker object.
   Image Modified
On
4. Specify the surveillance area on the video image
, specify the surveillance area, within
5. in which the
track counter will count the
6. neurocounter counts objects:
   1. Click the Settings button (1). As a result, the Detection settings window
will open
7. 1. opens.
      Image Modified
   2. Click the Stop video button (1) to capture a frame of the video image.

   3. Click the Area of interest button (2) and

select

8. 1. specify the area

,

9. 1. within which the

track counter will count the

10. 1. neurotracker counts objects (3).


Image Removed

11. 1. Info
       title Note
       To delete the selected area, click the

Image Removed button

12. 1. Image Added button (4).

    2. Click the OK button (
4
13. 1. 5).
14. If you don't set the Generate event only when the number is changed checkbox (4)
is not set
15. , then from the Counter period drop-down list (2), select the counter period time unit: seconds, minutes, hours, days. Then in the field (3),
specify
16. enter the time
in
17. through which the event containing
the total
18. the total number of objects recorded for
a
19. the given time period
will be generated
20. is generated.
    The allowable range of values for the time units: seconds, minutes, hours—from 1 to 100, days—from 1 to 20.
    

    Info
    title Note
    If the entered value exceeds the allowable range, then after you click the Apply button, the maximum value is set automatically.

21. Set

the 

22. the Generate event only when the number is changed checkbox (4) if

it is necessary

23. you want to generate events only when changing the number of recorded objects

changes

24. .

    Info
    title Note
    If you set this checkbox

is set

25. ,

the

26. the Counter period field becomes inactive, and the specified value of the counter period is ignored.

27. If objects are lost during the track counter operation, then for more accurate counting, set the Set number of frames for counting checkbox (5)

and

28. , and in the field (6), enter the number of frames that

will be

29. are analyzed to calculate the average

objects

30. object number.

    Info
    title Note
    This feature works only if

the 

31. you set the Generate event only when the number is changed checkbox

is set

32. . The value of the number of frames for counting is selected experimentally depending on the neural network used. Recommended values are: 3, 5, 7, 9.

33. Click the Apply button (7).

The Configuring the neurotracker track counter is configuredcomplete.