Page History

...

1. Go to the settings panel of the Train detection object.
   
2. Click the Settings button. The Detection settings window opens.
3. Specify the area of interest on the video image:
   1. Click the Stop video button to capture the frame of the video image (1).
      
   2. Click the Area of interest button (2).

   3. On the captured video frame (3), sequentially set the anchor points of the area using the left mouse button, the situation of which you want to analyze (1). You can add only one area. When you try to add the second area, the first one is deleted. After you add the area, the remaining part of the video image is darkened.
      

      Info
      title Note
      To remove the area, click the button next to the Area of interest button. Specify the surveillance area in such a way that there is no other movement except for the train movement.

      Note
      title Attention!
      Setting the Area the area of interest is the mandatory condition for the detector's operation.

4. Go to the Parameters tab and do the following:
    
   1. In the Frames processed per second [0.016, 100] field, set the number of frames that the detector processes per second.

   2. Click the OK button to save the changes and return to the settings panel of the Train detection object.

      Info
      title Note
      To return to the settings panel of the Train detection object without saving the changes, click the Cancel button.

5. Click the Apply button on the settings panel of the Train detection object.

...