Versions Compared

Old Version 4

changes.mady.by.user Alena Kniazeva

Saved on

compared with

New Version 5

changes.mady.by.user Alena Kniazeva

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Go to the Settings tab → the Options tab (1) → Automatic connection (2).
    From the drop-down list (3), select the connection protocol.
    Description of the protocol and recommendations for selection are given
  2. Specify the required settings listed in the table
    3. .
  3. :
    Parameter
    4. Protocol
  4. ValueDescription
    5. TCPThis protocol is more reliable, but has a busy connection. We recommend selecting it for Servers with a small number of camerasUDP unicastUDP protocol has a higher data transmission speed, but it is less reliable. The unicast scheme is used to transmit data to a single recipient.
    You must select this protocol for a Server with a large number of cameras and which has several Clients working with itUDP multicast

    The multicast scheme is used to transmit data to a group of recipients. This protocol is best suited for a Server with a large number of cameras and which has many Clients working with it.
    Attention! This protocol must be supported by all network elements, including switches

  5. Automatic connection parameters
    Username

    Enter the username and password for automatic authentication when connecting to the servers

    6. The connection protocol of the Clients to the Server determines the choice either in favor of connection reliability or in favor of data transmission speed. You must select the connection protocol for each Sever of the domain. All Clients connected to the Server will receive video streams via this protocol.For automatic authorization when connecting to Servers, enter the username and password (4)

  6. . If you leave these

    7. fields

  7. values blank,

    8. authorization will be performed

  8. you must log in manually when you start the

    9. Client.

  9. client

    Note
    titleAttention!
    10. Cross-System Client

  10. The cross-system client connects to all

    11. Servers

  11. servers using a single username-password pair that must be created in each domain (

    12. see 

  12. see Cross-System client).

    13. In the Connection timeout field (5), specify the wait period
  13. Password
    Connection timeout
    		The default value is 60 seconds. Specify the time in seconds to wait for a successful connection before considering the attempt unsuccessful.
    14. The default value is 60 seconds, the maximum value is 300 seconds (5 minutes). If
  14. When you use this setting, an
    15. automatic connection attempt will occur
  15. attempt to automatically connect is made immediately. If
    16. connection fails
  16. unsuccessful, the
    17. Server will wait
  17. server waits for the
    18. period of time specified by the user (timeout) and repeat the connection attempt.
  18. user-specified timeout period and then retries to connect. The value must be in the range [5, 300] 
    Number of connection attempts
    		The default value is 1. Set
    19. Specify
  19. the maximum number of
    20. automatic connection
  20. attempts to automatically connect after the specified timeout
    21. (6).Specify the Servers to which you want to connect. For each Server, do the following:
    Image Removed
  21. . The value must be in the range [1, 100]
    Servers for automatic connection
    Select server
    		Select the server from the drop-down
    22. Select a Server from the
  22. list or enter the
    23. Server
  23. IP address
    24. (7).
  24. of a server
    Port
    		The default value is 20109. Specify the port
    25. for connecting to the Server (8).
    Info
    titleNote
  25. to connect to this server. If you leave the
    26. Port
  26. field blank, the
    27. standard port 20109 will be used for connection.
  27. connection is established via the standard port that is set by default
  28. Click the Add button
    29. (9)
  29. .
Info
titleNote
  • If you use the Cross-System

...

  • client, you can connect to only one

...

...

  • server to the list, all other

...

  • servers in that domain become unavailable for selection.
  • To remove a

...

  • server from the list, click

...

  • the Image Modified button.

Configuration of automatic connection of the Client client to Servers servers is complete. The next time you start Axxon One, it will connect connects to the selected Serversservers.

Configuration of automatic connection of the

...

client to servers that belong to different domains

When you use Cross-System Clientclient, select the main domain after adding you add all Servers servers to the list. To select the main domain, set the the Main checkbox in checkbox in the corresponding column of the Server server that is on the domain.

When connecting, the Client client will use the parameters (maps, layouts, user permissions) of the main domain.

Configuration of automatic connection of the

...

client to the nodes of the FailOver system

If you want to configure automatic connection to a node of the FailOver system, do the following:

  1. Set the Discover cluster checkbox (1).Image RemovedEnter
  2. In the Select server field, enter the IP address of any
    3. Server
  3. server of the cluster
    4. (2) and click
  4. .
  5. Click the Image Modified button.
  6. From the drop-down list (3), select a node that you want to add to autoloading. 
  7. Click the Add button.
  8. Click the Apply  button. To cancel the actions, click the Cancel button.

Configuration of automatic connection of the Client client to the node of the FailOver system is complete. 

...

Configuration of automatic connection

...

to the backup server

To automatically connect to the backup server if the main one is unavailable server in the N+1 cluster configuration, do the following is unavailable:

  1. In the Automatic connection parameters group, enter the IP address and port of the main server , as well as and the name of the node.
  2. Click the Add  button.
  3. Set the checkboxes in the Main and Discover cluster columns.
  4. In the Preferred servers parameters group, select a backup server from the list or enter its IP address and node name.
  5. If necessary, change the default port for the backup server in the Port field.
  6. Click the Add  button.
  7. Click the Apply  button.

Configuring the Configuration of automatic connection with to the backup server is complete.

...

Change the

...

server port

To change the port of an already added Server, do the followingserver:

  1. From the Select the Server from the list again (1).
    Image Removedserver drop-down list, select the server.
  2. In the Port field (2), specify a new numberport.
  3. Click the Edit button (3).

Changing the port of the added Server server is complete.

...

Export and

...

import of the configuration of automatic connection

To save the configuration of automatic connection to Servers servers and preferred Servers servers (see Preferred servers) to a JSON file, click the Export button.Image Removed

To load the configuration on the Clients, do the followingclients:

  1. Click the Import button.
  2. Click the Apply button.

Loading of configuration is complete.