Page History

...

• Access permissions to search in the archive (see Role).
• A camera that is configured and connected and has an embedded temperature detector 
• A detector that is configured and connected to the camera (see see Embedded temperature detector).

...

1. Open the required layout (see Configuration of layouts).
2. Select the required camera.
3. Click the Search button in the lower right corner of the surveillance window (see Search in archive).
4. Set a search interval (see Setting a search interval).
5. Click the button.
6. Select Search by temperature.
7. Specify the search criteria listed in the table:
   

   Criterion	Value	Description
   Search by temperature
   Temperature	°С	The default value is °C. Select the required temperature unit from the drop-down list
   	°F
   	K
   From	0	The default value is 0. The value must be in the range [0, 50]. Use the buttons: Image Modified to decrease the numerical value. Image Modified to increase the numerical value
   To	50	The default value is 50. The value must be in the range [0, 50]. Use the buttons: Image Modified to decrease the numerical value. Image Modified to increase the numerical value

   
   
8. Click the Search button.
   

   Info
   title Note
   You can stop the search at any time. To do this, click the Stop button that replaces the Search button.

...