Unable to render embedded object: File (books.jpg) not found.
Go to documentation repository
Page History
If a relay is part of an IP server, then you must specify the video camera to which it will be linked in the settings of the given relay. When you do this, the Relay object will appear under the specified Camera object in the object tree. Afterwards the video camera selection will be also available.
| Info | ||
|---|---|---|
| ||
This setting is relevant only for relays connected to IP servers. The relay and the video camera to which it is to be linked must be connected to the same IP server |
In all other cases the Relay object will automatically be displayed in the objects tree as a child of the video camera itselfvideo camera has a built-in or connected discrete output, a Relayobject is automatically displayed as the child object of the video camera. The number of Relay objects for a video camera is equal to the number of discrete outputs for the camera.
To configure a Relay object, perform the following:
...
The relay will then be switched to its assigned work mode.
To check the functioning of the relay, click the Test button. If the relay is configured correctly, its status will briefly change.
If a relay is part of an IP server, the sensor settings allow choosing the video camera of the IP server it will be matched to. When you do this, the relay object will appear as the child object of the specified camera in the object tree.
| Tip | ||
|---|---|---|
| ||
Play corresponding video |
Overview
Content Tools