Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

By default, the LPR channel recognizes the LP numbers of all vehicles passing the camera viewing zone: i.e. moving toward the camera and away from the camera. The module can be set to recognize and save the LP numbers of the vehicles moving in certain direction: away from the camera, towards to the camera, any. The following results can appear as an outcome of the vehicle movement direction recognition: away from the camera, towards to the camera, undefined.

If traffic direction is set, then by default in case if the direction of vehicle movement does not coincide with the specified value, the Entered the oncoming lane alarm event will be created. This event can be disabled. If vehicle movement direction is undefined, the Entered the oncoming lane alarm event is not created.

Info
titleNote.

This setting is given only when Auto-Uragan 3.5.0.29, Remote recognition, VIT and VIT AxxonSoft modules are in use.

To select the movement direction for the vehicles to be recognized, do the following:

  1. In the System Settings dialog window, open the Hardware tab.
  2. In the object tree on the left side of the Hardware tab, select the LPR channel, corresponding to the activated Auto-Uragan 3.5.0.29 program module , Remote recognition, VIT or AxxonSoft program modules in the objects tree on the Hardware tab (see Activating the program module, used for identifying the plates section). The settings panel of the selected object will open on the right side of the window.
  3. From the Direction drop-down list, select the required item (3).
  4. If the

    away

    from the camera or

    towards

    to the camera value is selected in the Direction dropdown list, the Record violation checkbox become active (4). By default this checkbox is set. That means that in case if the direction of vehicle moving is not coincide with the specified value, the Entering an oncoming lane alarm event will be created. If this event should not be created, uncheck the checkbox.

    Info
    titleNote.

    The following variations are possible depending on selecting the traffic direction:

    • if the to the camera direction is selected and the Record violation checkbos is set the recognition is performed in both direction; if traffic is performed from the camera the alarm event will be created;
    • if the from the camera direction is selected and the Record violation checkbos is set the recognition is performed in both direction; if traffic is performed to the camera the alarm event will be created;
    • if the to the camera direction is selected and the Record violation checkbos is not set the recognition is performed only in direction to the camera;
    • if the from the camera direction is selected and the Record violation checkbos is not set the recognition is performed only in direction from the camera;
  5. Click Apply (5).

The vehicle movement direction is now selected.