Versions Compared

Old Version 1

changes.mady.by.user Gennady Marchenko

Saved on

compared with

New Version Current

changes.mady.by.user Sofya Uyutova

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

To set the parameters of connecting Clients to the Web-server, do the following:

  1. Go to the General settings tab on the settings panel of the Web-server object (1).

  2. In the

    Port’s

    Port number field of the Http-server group specify the number of the port to connect to Http-server (

    1)

    2).

    Note
    titleImportant!

    This port is used when connecting to the Web-server from web-browser. The default port for connection of mobile clients is 8085. To change it, edit the jetty.port parameter value in the start_64.bat file (start_86.bat for 32-bit system) in <Intellect installation>\Modules\Jetty\ folder.


    Image Modified

  3. In the Amount Number of connections field of the Http-server group specify the maximum permissible simultaneous connections to Web-server via Http protocol (2). The less there are connections, the less Server load is. This parameter is selected experimentally.

    Info
    titleNote.
    Connections are used to receive video (live or archive), to receive audio (live or archive), to send audio to INTELLECT™, to get data on configuration, to send commands to INTELLECT™, etc. The Client can use the same connection to perform several actions.

  4. If data is to be transmitted via Web-server using HTTPS protocol, then perform the following settings in the HTTPS-server group:

    1. Set the Use HTTPS protocol checkbox checked (4).
    2. Specify path to the key file in the Key field using the Image Added button (5).
    3. Specify path to the certificate file in the Certificate field using the Image Added button (6
    In the Port’s number of the Mobile-server group specify the port number to connect to the Mobile-server (3
    1. ).
    2. In the
    Amount of connections
    1. Port number field of the
    Mobile
    1. HTTPS-
    server
    1. sever group specify the
    maximum permissible simultaneous connections to Mobile
    1. port number in order to connect to HTTPS-server (
    4
    1. 7).
  5. To save all the changes, click the Apply button (5).

The parameters of connecting Clients to the Web-server are now set.