Page History

The Auto-Intellect software module supports the wide list of Radar type devices. Selecting of connected device is performed via Speed traps server object corresponding to the configured Radar software.

To select the model of Radar device To select the model and installation type of a Speed-trap device, do the following:

1. Open the Hardware tab in the System Settings window (1).
2. In the object tree on the left side of the Hardware tab, select the Speed-trap server object representing the Radar module to be set up. The settings panel of the selected object will open on the right side of the window Go to the Speed traps server object (2).
   

3. Specify the model of Radar device from the Model list of supported devices (3)From the Model drop-down list (3) select the model of the supported installed Speed-trap device.

   Note
   title Attention!
   Correct operation of the Iskra-1, Iskra-1B, Iskra-1D, Iskra-1KRIS models is not guaranteed.

   
   

4. From the Type drop-down list select the installation mode of Speed-trap device:
   • Stationary - if the Speed-trap device is installed stationary.

   • Moving - if the Speed-trap device is installed on moving vehicles.

     Info
     title Note
     The availability of the Type drop-down list depends on the selected Speed-trap device model.

     
     

5. Click Apply (4).

The process of selecting the module of Radar devise and installation mode of Speed-trap device is completed.