Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

To set up Traffic Detector select the camera to send the video image to the module. The selected Camera object should represent the video camera directed at the driving lanes. This object should be created and set up beforehand in the Intellect package (see the Intellect Software Package. The Administrator's Guide for the details of the Camera object setup).To select the camera for select the camera to be used by Traffic Detector, do the following:

  1. Open the Hardware tab in the System Settings window (1).
  2. In the object tree on the left side of the Hardware tab, select the Traffic Detector object representing the Traffic Detector module to be set up. The settings panel of the selected object will open on the right side of the window Go to the Traffic Detector object settings panel (2).
  3. In

    From the

    Camera

    Select cameras drop-down

    list select a Camera object

    list (3), select a camera aimed at the roadway, the video from which will be processed by the Traffic Detector module.

    Info
    titleNote

    Prior to that, the camera should be created and configured in Intellect.


  4. Click Apply (4).

The camera is now linked to camera to be used by the Traffic Detector is selected.