Go to documentation repository
Page History
Настройка подключения контроллера Configuring the MorphoAccess SIGMA Lite осуществляется следующим образом: controller connection is as follows:
- Go to the Перейти на панель настроек объекта MorphoAccess SIGMA Lite, который создается на базе объекта Компьютер на вкладке Оборудование диалогового окна Настройка системы.
- В поле IP: (1) ввести IP-адрес для подключения к контроллеру MorphoAccess SIGMA Lite.
- В поле Port: (2) ввести порт для подключения к контроллеру MorphoAccess SIGMA Lite.
- Нажать на кнопку Apply (3) для применения изменений.
- object settings panel, which is created on the basis of the Computer object on the Hardware tab of the System Settings dialog box.
- In the IP field (1) specify the IP address to connect to the MorphoAccess SIGMA Lite controller.
- In the Port field (2) specify the port to connect to the MorphoAccess SIGMA Lite controller.
- Click the Apply button (3) to apply the changes.
Configuring the MorphoAccess SIGMA Lite controller connection is completeНастройка подключения контроллера MorphoAccess SIGMA Lite завершена.
Overview
Content Tools