Page History

The settings panel of the SIP-device object is shown in the pictures figures below.

Image ModifiedImage Removed

Table describes the setting parameters of the SIP-device settings panel system object.

№	Parameter	Method for setting the parameter value

Description

Parameter description

Presented as

Representation	Default value

Range of values

Value range
1

The

Identification number

field

Automatically

Shows

Displays the identification number of the

SIP-device object in the system

.Sequence of numbers

Numbers, letters, periods, hyphen, dash and underscore

-

Depends on the number of the SIP-device objects in the system

.

2

The

Name

field

Enter the value

in

into the field

Assigns

Sets a name

to

of the SIP-device object in the system

.

Latin, Cyrillic

letters

and service characters

SIP-

device

terminal

A line

representing

containing a sequence of any

symbols

characters (letters, digits, service characters

apart from

except > and <

symbols

characters),

not

case-

sensitive

insensitive.

Number of

symbols –

characters—from 1 to 60

.

3

The

Disable

checkboxIs set with a

Set the checkbox

Shows

Sets the

status

state (enabled or disabled) of the SIP-device object in the system

.

Boolean type

-

Clear

Yes –

Set—the SIP-device object is disabled and

is not in use.No – the

isn't used

Clear—the SIP-device object is enabled and

is in use.

used

4

The

SIP-terminal

dropdown listIs selected in

Select the value from the list

Assigns

Sets the

parent

SIP-terminal parent object for the given SIP-device object

.

Name of the SIP-

terminal

terminal objects

registered in the system

.

Name of the

parent

SIP-terminal parent object

Depends on the number of the SIP-terminal objects in the system

.

5

The

Device type

drop-down list

Select the value from

Is selected in

the list

Sets the icon type to

represent

display the device on the Map

.

Names of the available icon types

-

SIP client — the SIP-device acts as a client, it can be connected to any SIP-server

SIP server — the SIP-device acts as a server, any SIP-clients can be connected to it

Peer-to-peer terminal type is not supported at the present moment.

	No value touch panel speaker camera microphone default
6	Device priority	Select the value from the list	Sets the priority of a call from this device in the incoming calls window of the SIP panel	Sequence of numbers	-	0–10 The lower the number, the higher the priority and, accordingly, the higher the display in the list. If the field is left blank, then the priority is considered to be minimal. Calls from devices with the same priority will be sorted by the time of the call
The Device connection settings group
7	User ID	Enter the value into

The Connection settins group

6The User ID fieldEnter the value in

the field

Sets the SIP-device identification number, i.e. the number to call it

.

IntegerThe

Sequence of numbers

>=0

7

Device IP address

field

Enter the value

in

into the field

For the SIP-server terminal type only.

Sets the SIP-device IP address

.

IP address

1.0.0.

0 - 255The

0–255.255.255.255

8

Password

field

Enter the value

in

into the field

For the SIP-server terminal type only.

Sets the

The password specified on the SIP-device

.

Latin, Cyrillic

letters

and service characters

A line

representing

containing a sequence of any

symbols9The State field

characters (letters, digits, service characters)

State

Automatically

For the SIP-server terminal type only.

Displays the SIP-device state

-

The Video / Audio tab (only for the SIP-server terminal type

...

).

Image Added

Table describes the setting parameters of the Video / Audio tab.

Set the switch to the required position — the . — a . — any .11The drop-down listIs selected in ..12The switch switch to the positionSets the microphone used for calls — the . — the .13The field

№

Parameter

Method for setting the parameter value

Parameter description

Representation

Default value

Value range

1

Video

Set the required radio button

10

The Video switch

Sets the video camera used for calls

Supported options of camera usage

Off

Off

—the video is not used during the call

SIP camera

—a SIP-device camera connected via the SIP protocol is used

Other

—any other camera from the Intellect hardware tree selected from the Camera drop-down list is used

2

Camera

Select the value from the list

Sets any video camera used for calls

Name of the Camera objects

registered in the system

-

Depends on the number of the Camers objects in the system

3

Audio

Set the

required

radio button

Enables or disables the audio during a call

Supported options of audio usage

Off

Off

—the audio is not used during the call

On

—the microphone of the SIP-device is used

during the call

4

Microphone

Automatically

Displays the name of the Microphone object corresponding to the SIP-device

-

The Relay tab (only for the SIP-server terminal type

...

).

Image Added

Table describes the setting parameters of the Relay tab.

№	Parameter	Method for setting the parameter value	Parameter description	Representation	Default value	Value range
1	DTMF type	Select the value from

14The DTMF type drop-down listIs selected in

the list

Sets the type of the tone DTMF

command

signal

Supported signal

typein_bound

types

sip_info

sip_info—signals are transmitted in the INFO message of the SIP protocol

sip_notify—signals are transmitted in the NOTIFY message of the SIP protocol

in_band—the

in_bound – the

signal is transmitted as normal sound in an audio stream

.

rtp

http_

nte –

bas—signals are transmitted via

RTP 15The

the HTTP protocol separately from the voice stream

.

sip_info – signals are transmitted in the SIP INFO message.

sip_info_relay – signals are transmitted in the SIP INFO message with the DTMF Relay function.

sip_notify – signals are transmitted in the SIP NOTIFY message.

2

Signal duration, ms

field

Enter the value

in

into the field

Sets the time period in milliseconds during which the

command is to

DTMF signal should be sent

.

Integer>016

Sequence of numbers		>0
3	Device connection settings	-	Opens a pop-up window of connection settings when the http_bas type of tone is selected	-	Inactive by default	-
4	Name

The Name field

Enter the value

in

into the field

Sets the name of the command that will be displayed on the SIP-panel

Latin, Cyrillic

letters

and service characters

A line

representing

containing a sequence of any

symbols17

characters (letters, digits, service characters)
5	Code

The Code field

Enter the value

in

into the field

Sets the unique command code

Sequence of numbers or HTTP request (for http_bas)

A line containing a sequence of numbers or HTTP request

The Device connection settings pop-up window.

Image Added

Table describes the fields of the Device connection settings window.

>0

№

Parameter

Method for setting the parameter value

Parameter description

Representation

Default value

Value range

1

Login

Enter the value into the field

Sets the user name to connect to the SIP-device (BasIP)

Latin, Cyrillic and service characters

-

A line containing a sequence of any characters (letters, digits, service characters)

2

Password

Enter the value into the field

Sets the password to connect to the SIP-device (BasIP)

Latin, Cyrillic and service characters

-

A line containing a sequence of any characters (letters, digits, service characters)

3

IP address

Enter the value into the field

Sets the IP address of the SIP-device (BasIP)

IP address

-

1.0.0.0–255.255.255.255

Integer

>0

18

The Duration, ms field

Enter the value in the field

Sets the time period in milliseconds during which the command is to be sent

Integer

Page tree

Versions Compared

Old Version 1

New Version Current

Key