Go to documentation repository
Page History
If the images are stored in the local or network folder (see Configuring the recognized LP images and vehicle images storage on disk) you can access them via the HTTP GET-requests.
General request format:
GET http://
...
IP-address:port/lprserver/GetImage/
...
{type}/{id
...
http://server_ip:10001/lprserver/GetImage/Plate_numbers/id;
| Info | ||
|---|---|---|
| ||
The Frames request means accessing the main image, the Plate_numbers request means accessing the LP image cut from the main one. |
}
Request parameters:
where
...
| Parameter | Required | Parameter description |
|---|---|---|
| id | Yes | the image ID |
(image file name without the additional _Frames or _Plate_numbers) |
...
| type | Yes | Frames - request means accessing the main image, Plate_numbers - request means accessing the LP image cut from the main one |
Request example:
GET http://http://127.0.0.1
The response to the request is the JPEG image.
For example, to get the images like the ones on the screenshot below, you should specify the following HTTP GET-requests:
...
:10001/lprserver/GetImage/Frames/66FB34A2-1B38-E811-A92F-001A7DDA710E
GET http://
...
127.0.0.1:10001/lprserver/GetImage/Plate_numbers/66FB34A2-1B38-E811-A92F-001A7DDA710E
Response example:
JPEG image
Overview
Content Tools