Page History

You can set the following parameters for alarm handling:

The maximum allowed reaction time to an alarm is the length of time from the moment the operator who accepted an alarm for processing exits alarm mode, after which the alarm returns to New status, and the count for the allowed time for ignoring an alarm begins again.

...

To configure alarm handling processing in the system, you must perform do the following steps:

1. Go to Settings → Options  Options (1)→ Alarm processing (1-2). 
   Image Modified

2. In the Time period of operator reaction to alarm

    field

   field, enter the time during which

   an operator who accepted an alarm for processing and exited alarm mode without evaluating it must return to alarm mode

   the alarm should be taken into processing, otherwise it will be assigned the Skipped status (3). The minimum value is 2 minutes.

   Info
   title Note
   To take an alarm into processing, it is necessary to switch to the alarm management mode.

   
   

   Info
   title Note
   After an alarm is taken into processing, the time for handling it is not limited.

   
   

3. Set the maximum dwell time for alarms on the Special Layout (4an alarm to stay on a special layout (4, see Working with Special layouts). After the dwell specified time has elapsed, the alarm will be removed from the layout and its place will be taken by the next one shows, which has not yet been displayed on the layout.

4. Select the alarm classifications for which you want to require comments assessment, after accepting which the operator is required to enter a comment (5).

5. Click the Apply button.

Configuration of alarm handling processing is now complete.