Page History

If you are using a fisheye fish-eye camera or video camera with a panomorph lens, configure the following settings of the Video camera object, in the Panomorph settings group:

1. To activate panoramic view, in the Activate list (1), select Yes.
   Image RemovedImage Added

2. In the Video camera the Camera position list(2), select the mount of the video camera.

   Note
   title Important!
   Some system features and functions depend on the chosen position of the video camera: digital zoom, display of video in the surveillance sector on the map, and immersive mode.

   
   

3. If it is a fisheye fish-eye camera, select the Common fisheyeCommon fisheye-lens lens type (3).If it is a video camera with a panomorph lens, select the corresponding type (3). When using wide angle dual lens XingYun devices, select the Double sphere fisheyefish-eye-lens type.

   Info
   title Note
   The types of device lenses certified by ImmerVision are listed in the document.  You You cannot select ImmerVision lenses in Linux.

   
   

4. If it is a video camera with an Immervision lens, select the appropriate display mode (4): 360^о panorama with virtual PTZ (PTZ) or 180^о panorama (Perimeter).

5. A typical fisheye fish-eye lens with standard settings produces a skewed image in the upper part of the screen. If this is the case, enable the Fit to frame option (5).

   Note
   title Important!
   If you have multiple streams from a camera, you need to calibrate each stream. To do this, before applying the settings, switch to the required stream tab in the viewing tile (see The Video Camera Object).

   
   

   Note
   title Important!
   Video is calibrated  calibrated every time you change any parameters in the the Panomorph group.

   Manual calibration is also available. To do this:

   1. Disable Fit to frame, select No in  in the Enable  list list and click the Apply button.

   2. Select Yes in the Enable list.

   3. Configure the video area (circle). Left-click any point inside the circle and move the mouse pointer. To change the diameter of the circle, do as  as follows: click an anchor point Image Removed and Image Added and move the mouse pointer.
      Image RemovedImage Added
   4. Click the Apply button.
      

      After applying the settings, the area outside the circle will be cut.

Configuration of the fisheye fish-eye camera is complete.