Versions Compared

Old Version 1

changes.mady.by.user Yulia Morozova

Saved on

compared with

New Version Current

changes.mady.by.user Darya Andryieuskaya

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Note
titleAttention!

To use Tag&Track Pro, make sure your PTZ camera supports Absolute Positioning. The devices that support

...

Tag&Track Pro are listed in the Drivers Pack documentation.

When connecting via the ONVIF protocol, Absolute Positioning support is also required. Contact camera vendor for Information on the Absolute Positioning support in the ONVIF protocol.

For the Tag&Track Pro function to operate, the video cameras should be positioned on the top facing the flat surface , mount the cameras at the top of the scene, so that you can track motion on the plane (floor, ground) from abovewhere the objects are moving.

You have to point panoramic and PTZ cameras The overview and the PTZ video cameras should be pointed in the same direction and be close to each other. If they are far from each other, they can interpret the scene differently. Because of this, sometimes the algorithm may not operate correctly.

For all objects from the overview video camera, the corresponding pan coordinates should be in the range from 0° to 180°, or from −180° to 0°.

In addition, panoramic the overview video cameras should meet the following requirements:  Video Requirements for Service Video Detection Toolsrequirements for scene analytics detection tools.