Page History

Create To create and configure the Camera object as follows, do the following:

1. Select Create object -> Camera in In the context menu of the Video Capture Device objectcapture device object, select Create object → Camera.
   Image Modified

2. As a result, the basic settings toolbar panel of the object is displayed.
   Image Added

   Info
   title Note
   Basic settings are specified set automatically. It is possible to change an If necessary, you can change the ID, object name, and parent object.

   Image Removed

3. To Click the Apply button to create the object, click the Apply button.
4. Select In the object tree, select the created Camera object in the object tree (1).
   Image Modified
5. Configure the created object.:
   

   1. In the From the Channel number list (2) , select a physical video output of the card to which the camera is connected (see Features of video subsystem configuration section).

      Info
      title Note
      Channel numbers within one Video capture card must not device object mustn't be repeated.

   2. In the Resolution list (3) , select the resolution with which the video signal is captured: Standard – —minimum accepted allowable value for the card, High – mean value —average value, and Full – —maximum accepted value with which a video signal is capturedallowable value.

      Note

      Info
      title Note
      title	Resolutions supported by video capture cards are given in Appendix 4. Technical specifications of video capture cards
      Info
      . While When configuring the video camera, which is connected through via the SC590N4 video capture card, in the Intellect software Axxon PSIM, you must set the frame resolution is equal to be set as the resolution set on the video camera. Otherwise, artefacts artifacts can appear on the video image.
      Info
      title Note
      If If you are using the Stretch VRC-6404 HD video capture card is in use, then restart Intellect after changing resolution.  , make sure to restart Axxon PSIM whenever you change the resolution. Changing the Resolution doesn't guarantee that the resolution of the received video signal changes, as it depends, among other things, on the internal settings of the camera itself. If you need to specify certain streams strictly, it is better to configure multistreaming video.

   3. Click the Apply button to save the changessettings.

Configuring the Camera object is completedcomplete.

Repeat these actions the steps described in this section for all cameras connected to the card.