Go to documentation repository
Page History
The Vehicle processor object settings panel includes the following interface elements:
The following table describes the elements of the Vehicle processor object settings panel.Anchor _Ref270089423 _Ref270089423
№ | Parameter name | Parameter setting method | Description | Data type | Default value | Value range |
|---|---|---|---|---|---|---|
1 | ID* | Automatically | Displays Vehicle processor object's ID in the system | Numbers | - | From 1 and above. |
2 | Name* | Enter the value in the field | Set the object's name Vehicle processor in the system | Latin, Cyrillic and special symbols | Vehicle's processor | A sting, containing a sequence of characters (letters, digits, characters) non case-sensitive. |
3 | Disable | Is set by a checkbox | Set the Vehicle processor object state (enabled or disabled) in the system | Boolean type | No |
Yes – Vehicle processor object is disabled and is not in use. |
– Vehicle processor object is enabled and in use | ||
4 | Computer | Select the value from the list |
Set the Computer parent object in the system, to which Vehicle processor object is related | Names of objects, registered in the system Computer | Name of the parent object Computer | Depends on |
the Computer objects number |
in the system | |||
5 | Virtual loop | Is set by a checkbox | Enables the mode that is resulted in retranslation of messages about vehicle's passing in or out of the detection zone |
Boolean type | No |
Yes – Virtual loop imitation mode is enabled. | |||||
6 | Collect data | Is set by a checkbox | Enables the mode that is resulted in traffic data acquisition and storing them to the database | Boolean type | No |
Yes – traffic data acquisition mode is enabled. | |||||
7 | Register incidents | Is set by a checkbox | Enables the mode that is resulted in accidents fixation in the traffic stream | Boolean type | No |
Yes – accidents fixation mode is enabled. | |
8 | Vehicle detection |
11
Access
Select the value from the list
Set the region object corresponding to the area, located at the entrance area to the detection zone
Names of Region objects, registered in the system
-
Depends on the Region objects number, registered in the system
12
Exit
Select the value from the list
Set the region object corresponding to the area, located at the exit area from the detection zone
Names of Region objects, registered in the system
-
Depends on the Region objects number, registered in the system
13
Select the value from the list | Set the module Vehicle detector which data have to be processed | Names of objects, registered in the system Vehicle detector | - | Depends on the Vehicle detector objects number, registered in the system | ||
9 | Vacant lane speed, km/h | Enter the value in the field | Set the Free stream speed constant which is to be entered in the database in case when at least 5 vehicles have entered the detection zone for the data acquisition time | Number. | - | From 0 to 200 |
10 |
Queue length
Is set by a checkbox
Enables the mode, which results in determining the Length of turn
Boolean type
No
Yes– determining the Length of turn mode is enabled
No – determining the Length of turn mode is disabled
Data collection time, s | Enter the value in the field | Set the Data acquisition time, coming from vehicle detector module. Upon the end of this time validity the data are stored in the database | Number. | - | From 60 to 3600 |
11 | Classification setup | Press the button | Access to Classification settings of detected vehicles | - | - | - |
*The element name is not displayed in the settings panel.
Overview
Content Tools