Go to documentation repository
Page History
In order to manage an OnGuard reader, go to the Map window and open the functional You can manage the OnGuard reader in the Map window using the function menu of the relevant OnGuard Reader object by right-clicking its icon.
The commands of the functional function menu are described in the table.
Command | Description |
Open Door
Open the door controlled by the reader
Set mode: Locked | Lock the reader |
Set mode: Card only | Allow access by card only |
Set mode: Pin or Card | Allow access by PIN |
code or card | |
Set mode: Facility Only | Allow access by facility code match |
Set mode: Unlock | Unlock the reader |
Set mode: Pin and Card | Allow access by PIN |
code and card |
Set mode: Facility Only
| Get Hardware status | Get the status of the hardware |
Open Door | Open the door controlled by the reader |
Set mode: Default | Set the default reader mode |
| Info | ||
|---|---|---|
| ||
| Some readers may not don't support all of the modes available in the menu. Please refer Refer to the reader manufacturer’s documentation. |
The OnGuard reader can have the following states:
| Online |
| Offline |
| Options Mismatch |
| Cabinet Tamper |
| Power Failure |
| Reader Tamper |
| Door Forced Open |
| Door Held Open |
| Auxiliary Input 1 |
| Auxiliary Input 2 |
| Auxiliary Input 3 |
| Bio Verify |
| DC Ground Fault |
| DC Short Fault |
| DC Open Fault |
| DC Generic Fault |
| RX Ground Fault |
| RX Short Fault |
| RX Open Fault |
| RX Generic Fault |
| First Card Unlock Mode |
| Extended Held Mode |
| Cipher Mode |
| Low Battery |
| Motor Stalled |
| Read Head Offline |
| MRDT Offline |
| Door Contact Offline |
| Door opened |
Overview
Content Tools