Versions Compared

Old Version 1

changes.mady.by.user Alina Luchkina

Saved on

compared with

New Version Current

changes.mady.by.user Alena Kniazeva

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

For the precise tracking of the object under observation, you should must calibrate the telemetry device by matching at least four six telemetry device positions with the frame points of each overview camera.

Note
titleAttention!
  • The recommended number of points that
should
  • must be set is
4
  • 6-10. If you add more points, the algorithm will be configured more precisely. However, this
may increase
  • increases the chance that some of the points are set up incorrectly, which
may cause
  • causes the decrease of the operation quality.
  • The points set in the calibration setting
should
  • must not be on the same line for both the overview and the PTZ camera. It is recommended to set the points for both cameras so that they evenly cover the entire frame.
  • The calibration points
should
  • must be set on the same surface (floor, ground). It is not recommended to set the points on different surfaces (for example, when some points are on the ground, and other points are on a tree, etc.).

To calibrate the telemetry device, do the following:

...

Note
titleAttention!

The object under observation should must be inside the frame of the PTZ camera.

4. Repeat the process to set at least 4 6 points.
5. Repeat the process for all overview cameras (select the camera by clicking in the list of the overview cameras).
6. Click the Apply button to save the calibration points.

...