Versions Compared

Old Version 1

changes.mady.by.user Alina Luchkina

Saved on

compared with

New Version Current

changes.mady.by.user Alena Kniazeva

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

In Axxon OneVMS supports automatic copying of the archive , it is possible to automatically copy archives (video, audio, alarms) and camera events from local servers Servers that are not in the same Axxon combined into a single Axxon-domain with the a centralized serverServer.

Info
titleNote

This feature is useful, for example, in the following case:

  • The video from a bus on the route network is written recorded to a temporary archive on the local server Server specific for each bus.
  • When the bus arrives at the depot, the archive and camera events are automatically transferred to the centralized server.

To use this option, configure the centralized server Server as follows:

  1. Manually add the Interop IP device to the configuration (see Searching, adding, configuring and removing IP devices);.

  2. Enable The the Embedded storage object.
    Info
    titleNote

    It is recommended to synchronize the time of the local Server with the time of the centralized Server.

  3. To receive sound from video cameras, configure the Microphone object.

  4. Specify the address of the device in the following format (1): <IP-address of local server>Server>:<name of local server Server in Axxon-domain>:<ID of camera on server>Server>.

    Note
    titleAttention!

    The Server name is case-sensitive. 

    If the Server name is Server1, no connection will occur then if you enter server1 or SERVER1 there will be no connection.

  5. Specify a port of the local Server from which data is transmitted (2). If you use TCP protocol (see 8step 9), please specify the RTSP port number (554 by default, see see Configuring an the RTSP Serverserver). If you use rtspoverhttp or rtspoverhttps protocol, specify the Web server's port (80 by default, Configuring the Web-Server).

  6. Specify the user name and password (3). The user must have permissions to access the local server.
  7. If you want to display live video from the local server when it is available, select Yes in the appropriate corresponding field (4).
  8. Specify the maximum playback speed (5).

  9. Select the data transfer protocol (6).

  10. Click the Apply button.
  11. Repeat the above steps for previous steps to add and configure all the required necessary video cameras from all local serversServers.

  12. Configure automatic replication from the embedded storages of the added devices to the centralized server archive (see Configuring data replication).

    Note
    titleAttention!

    With a high network load, there may can be gaps in the centralized server archive.

You have successfully set up automatic Automatic data copying from the local servers to the centralized server is configured.