Versions Compared

Old Version 1

changes.mady.by.user Yulia Morozova

Saved on

compared with

New Version Current

changes.mady.by.user Alena Kniazeva

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

You can select several cameras at once and edit their parameters to display them in the Monitorinterface box window.

To select video cameras in bulk, do the following:

  1. Go to the settings panel
    2. for
  2. of the Monitor interface object.
    3. Click the Range button in
  3. In the List of cameras tab
    4. (1)
  4. , click the Range button.
    Image Modified
    As a result, the Add/Edit Camera Objects
    5. dialog box is displayed
  5. window opens.
    Image Modified
  6. Select the required cameras in the left list of the Add/Edit Camera Objects
    7. box (1)
  7. window.

  8. Move the selected cameras to the right list by clicking the Image Modified

    9.  button (2)

  9. button.

    Info
    titleNote

    The right list is the list of cameras selected for displaying in the Monitor

    10. interface box

  10. window.
    The Image Modified

    11.  button

  11. button is used for inverse action

    12. , i.e.

  12. , that is, for moving the selected video cameras from the right list to the left one

    13. (2)

  13. .

    In both lists, you can change the sorting by clicking

    14. on

  14. the column names to make it easier to find the required cameras and their settings.

    As a result, the selected cameras
    15. will be
  15. are displayed in the list on the right of the Add/Edit Camera Objects
    16. box (3)
  16. window.

  17. If it is necessary, select the names of required cameras in the right list for

    18. complex

  18. bulk editing of their parameters

    19. (3)

  19. .

    Note
    titleAttention!
    The same parameters will be set for all selected cameras.
    20. To

  20. In the fps drop-down list, select the required frame rate of a video signal to enable decimation of a video signal for transmitting to the Monitor of the

    21. Client, select the required frame rate of a video signal in the fps drop-down list (4)discouraged to set additional grooming

  21. client.

    Note
    titleAttention!
    22. It is strongly

  22. We strongly discourage you from setting additional decimation and/or compression for video signals displayed on the

    23. Server

  23. server Monitor

    24. :

  24. , as this

    25. will result

  25. results in unnecessary consumption of the

    26. Server

  26. server resources while the video image quality deteriorates.

    Info
    titleNote
    The selected fps value must be less than the frame rate of the video signal digitized by the video capture device. Otherwise, the frame rate of the video signal
    27. will be
  27. is equal to the frame rate of the digitization.
    28. The fps, Compression, Gate, Backup archive and Gateway for backup archive settings are in
  28. All settings described below belong to the Common data for elements selected on the right group.
    For correct
    29. grooming
  29. decimation of a video stream compressed with the help of H.264 or MPEG4 codecs, the fps value
    30. is to
  30. must be equal to the keyframe rate specified in the device (IP
    31. -
  31. camera) or Axxon PSIM settings (see Configuring video compression
    32. section
  32. ).

  33. If the video compression level

    34. is to

  34. must be changed for transmitting to the Monitor of the

    35. Client

  35. client, select the required level of video signal compression

    36. in the

  36. from the Compression drop-down list

    37. of the Compression column (5). Compression

  37. . The compression level is increased from 0 (no compression) to 5 (maximum compression).

    38.   

  38. Info
    titleNote

    If the compression level is set for the

    39. Client

  39. client, a video signal on the

    40. Server is to

  40. server must be

    41. preliminary

  41. decompressed

    42. , that results in a great load increase on CPU of the Server

  42. beforehand, which leads to a significant increase in the load on the server CPU.

  43. If the Monitor
    44. is to
  44. must receive live and archive video from the selected cameras via the Gate object, then select the name of this object
    45. in
  45. from the Gate drop-down list
    46. (6)
  46. .
  47. To enable smart search in the archive of the selected cameras, select the VMDA metadata storage object corresponding to the VMDA
    48. trajectories
  48. tracks database
    49. intended to use
  49. for smart search from
    50. the
  50. the VMDA metadata storage drop-down list
    51. (7).
  51. .
  52. From the Hardware accelerated decoding drop-down list, select Do not change (default value, hardware acceleration specified for each camera is used), CPU decoder (blank value), Nvidia decoder, or Intel Quick Sync. Selecting a hardware decoder increases the load on the corresponding CPU.
  53. If necessary, select the required macro from the Macro1 and Macro2 drop-down lists (the default value is Do not change). Later you can run these macros from the camera menu in the Surveillance window (see Running macros from the Surveillance window)
  54. If
    55. If
  55. a video archive from the selected camera
    56. is to
  56. must be transmitted to the Monitor from the Backup archive object, then select the name of this object
    57. in
  57. from the Backup archive drop-down list
    58. (8)
  58. .
  59. If the transmission from the Backup archive object is performed via the Gate object, then select the name of this object
    60. in
  60. from the Gateway for backup archive drop-down list
    61. (9)
  61. .
  62. If cameras are used to view video archive from external storage, set the Setup edge storage
    63. check box (10)
  63. checkbox. As a result, for each selected camera, the external storage available to it will be applied.
  64. By default, the
    65. Video Surveillance
  65. Monitor receives a video stream through the
    66. Server
  66. server. If it is necessary to get the video stream not through a
    67. Server,
  67. server but from cameras directly,
    68. in the
  68. from the Connection drop-down list, select Direct
    69. (11)
  69. .
  70. To save the
    71. set
  71. specified parameters, click
    72. the
  72. the Set for cameras selected on the right button
    73. (12)
  73. .
    As a result
    74. set
  74. , the specified parameters will be displayed in the list on the right of
    75. the
  75. the Add/Edit Camera Objects
    76. box (3)
  76. window.
  77. Repeat steps
    78. 6
  78. 5-
    79. 12
  79. 15 for
    80. complex
  80. bulk editing of all required cameras.
  81. To save
    82. all
  82. the changes and close
    83. the
  83. the Add/Edit Camera Objects
    84. box
  84. window, click
    85. the
  85. the Apply changes and close button
    86. (13)
  86. .
    87. Set
  87. Specified camera settings will be displayed in
    88. the
  88. the List table on the settings panel of the Monitor object
    89. (2)
  89. .
  90. To save
    91. all
  91. the changes, click the Apply button
    92. (3)
  92. .

Video cameras are now selected in bulkBulk selection of cameras is complete.