Page History

№

Parameter

Method for setting the parameter value

Parameter description

Representation

Default value

Value range

1

BOSCH

FfmpegAllInOneDecoder

H263IppDecoder

H264InterlacedIppDecoder

H264IppDecoder

MJPEGIpp

Motion Wavelet 3.5

Motion Wavelet 7.1

MPEG2IppDecoder

MPEG4IppDecoder

MxPEG Mobotix

RGB24toYUV420

StreamLabs

VWV

WMVIppDecoder

27

Compressor 

Sets the

technology using which the compressed video stream

is decompressed when displaying the video signal on the video surveillance monior.

Note

. By default the parameter is not available for editing. To change the value of this parameter, set the 1 value for the EnableCodecSettings

 registry key (

see Registry keys reference guide)

Depends on the camera model

28

Estimate motion

Enter the value in the field

Sets the threshold of the camera sensitivity to motion depending on the change of the object brightness. The delta frame of the video signal is formed according to this criterion

Sequence of numbers

7

From 2 to 255

29

Key frames interval

Enter the value in the field

Sets the rate of the key frames

Sequence of numbers

8

Depends on the capabilities of the camera

• BOSCH;
• FfmpegAllInOneDecoder;
• H263IppDecoder;
• H264InterlacedIppDecoder;
• H264IppDecoder;
• MJPEGIpp;
• Motion Wavelet 3.5;
• Motion Wavelet 7.1;
• MPEG2IppDecoder;
• MPEG4IppDecoder;
• MxPEG Mobotix;
• RGB24toYUV420;
• StreamLabs;
• VWV;
• WMVIppDecoder

2

The Compressor
drop-down list

Sets the algorithm of the video stream compression.

Note. By default the parameter isn't available for editing. To change the value of this parameter, set the 1 value for the EnableCodecSettings registry key (see Registry keys reference guide)

List of available algorithms

No

Depends on the camera model

3

30

The Estimate motion
field

Enter the value in the field

Set the time period for keeping the video archive from the camera and audio archive (in case of synchronous recording) on the Server. The parameter allows storing the large archive for the selected camera using the archive of other cameras

Note. It is recommended to set the Store no less than parameter for no more than 30% of cameras, as this setting is only advisory. If there isn't enough space for the archive recording, the setting will be ignored and the recording won't stop anyway.

If more than 10 cameras are created in the system, then when setting this parameter for more than 30% of cameras in the system, after you click the Apply button, a corresponding warning message will appear. It can be disabled using the NotifyAbout_arch_days registry key (see Registry keys reference guide)

Day or hour depending on the value selected in the drop-down list

—

More than 1

Days

Hours

Determines the threshold of the camera sensitivity to motion depending on the change of the object brightness. The delta frame of the video signal is formed according to this criterion

Sequence of numbers

7

From 2 to 255

4

The Key frames interval
field

Enter the value in the field

Sets the rate of the key frames

Sequence of numbers

8

Depends on the capabilities of the used camera

Out of the group

6

The Rotation mode
checkbox

Set the checkbox

Enables the rotation of the video image displayed on the video surveillance monitor 

Boolean type

Clear

Set—rotation is enabled

Clear—rotation is disabled

The Rotate on*
drop-down list

Select the value from the list

Sets the angle of the video image rotation when the rotation mode is enabled

Sequence of numbers

0

0, 90, 180, 270

The Processing priority
slider

Set the slider in the position

Sets the priority of the video signals processing by ADC from a camera

Order of video signals processing

Normal

• Normal—normal video signals processing order;
• 1/3—1/3 processing order;
• 1/2—1/2 processing order

The Recording priority
slider

Set the slider in the position

Set the priority of video signals processing by ADC in the recording mode

Order of video signals processing in the recording mode

Normal

• Normal—normal video recording order;
• 1/3—1/3 processing order;
• 1/2—1/2 processing order;
• Real time—all ADC resources are used for video signals recording

10

The Store no less than
field

Enter the value in the field

Sets the time period for keeping the video archive and audio archive from a camera (in case of synchronous recording) on the server. The parameter allows storing the large archive for the selected camera using the archive of other cameras.

Note. We recommend setting the Store no less than parameter for no more than 30% of cameras in the system, as this setting is only ADVISORY. If there isn't enough space for the archive recording, the setting is ignored and the recording doesn't stop anyway.

If you create more than 10 cameras in the system, then when you attempt to set this parameter for more than 30% of the cameras in the system, after you click the Apply button, a corresponding warning message appears. You can disable it using the NotifyAbout_arch_days registry key (see Registry keys reference guide)

Day or hour, depending on the value selected in the drop-down list

NA

More than 1

Days

Hours

Sets the time period for storing the camera archive, after which the camera archive must be deleted.

Note. The archive can be deleted before the specified time if it is required for the loop recording

Days

Hours

Days

Hours

35

Type

Select the value from the list

Sets the type of the camera. The setting affects the type of the icons used to represent the camera on the map

List of available camera types

—

Fisheye

PTZ

Standard

36

Processing priority

Set the slider in the required position

Sets the priority of the video signals processing by ADC

Order of video signals processing

Normal

Normal—normal video signals processing order

1/3—1/3 processing order

1/2—1/2 processing order

37

Recording priority

Set the slider in the required position

Set the priority of video signals processing by ADC in the recording mode

Order of video signals processing in the recording mode

Normal

Normal—normal video record order

1/3—1/3 processing order

1/2—1/2 processing order

Real time—all ADC resources are used for video signals recording

38

Rotation mode

Set the checkbox

Enables the rotation the the video image displayed on the Video surveillance monitor 

Boolean type

Clear

Set—rotation is enabled

Clear—rotation is disabled

39

Rotate on

Select the value from the list

Specifies the angle of video image rotation when the rotation mode is enabled

Sequence of numbers

0

0, 90, 180, 270

Select the value from the list

• No—select if there are neither fisheye nor panomorph

• lenses on the camera;
• Standard fisheye lens—select if there is a fisheye lens on the camera;
• Autocalibration—select if there is a fisheye lens on the camera and you want to determine the video conversion parameters

• automatically

• for artifacts elimination;
• A0*V, A1UST, A8TRT, B0QQV, B4QQV, B5SST, B6SST—types of the panomorph lenses

Select the value from the list

• Ceiling;
• Wall;
• Floor

Determines

which part of the frame

is visible on the

video surveillance monitor after

conversion

75% for the Ceiling position

66% for the Wall position

Note. The default value may not

appear in the field

№

Parameter

Method for setting the parameter value

Parameter description

Representation

Default value

Value range

1

The Streams configuring
checkbox

43

Streams configuring

Set the checkbox

Enables the video signal multistream featureoption

Boolean type

Set—video Set—video signal multistreaming is enabled; different streams can be used for analytics, archiving, and display

Clear—video Clear—video signal multistreaming is disabled; a single stream is used for analytics, archiving, and display

The # field

Set—the Set—the stream is in useused

Clear—the stream is not in use

Clear—the stream isn't used

4

The Default
column

46

Default

Set the checkbox

Sets the video stream that will be is used in the following cases:

to
1. To display video locally and on the remote clients
;
2. .
to
3. To send the video stream to the remote clients
and to
4. , including the
Videogate
5. videogate that
will
6. can record this video stream
;
7. .
in
8. In cases when a video request doesn't specify the stream

List of available streams

Clear

Set—the Set—the stream is used by default

Clear—the Clear—the stream isn't used by default

475

The Video analytics
column

Set the checkbox

Sets the video stream used for video analytics.

This stream will be is used by the base standard motion detection tooldetector, zone detection toolsdetectors, tracking detection tooldetectors, face detection tool detectors (if an external recognizer isn't used).

The Video Analytics stream is used for the LPR server, face detection tool detectors (if an external recognizer is used), and the detection tools detectors that are part of the the Detector Pack subsystem. You can select the Default stream using the VMDA.ignoreAnaliticStream registry key (see Axxon PSIM base version).

The Archive/Archive (alarms) stream is used for the long-term backup archive

List of available streams

Clear

Set—the Set—the stream is used for video analytics

Clear—the Clear—the stream isn't use used for video analytics

The Archive
column

Set the checkbox

Sets the video stream that is recorded to the archive not upon alarm, but continuously, for example, at continuous recording

List of available streams

Clear

Set—the Set—the stream is used for archive recording

Clear—the Clear—the stream isn't used for archive recording

Set—the Set—the stream is used for archive recording upon alarm

Clear—the Clear—the stream isn't used for archive recording upon alarm

№

Parameter

Method for setting the parameter value

Parameter description

Representation

Default value

Value range

Any valid unused port numbers.

The number of ports is determined by the system administrator

№

Parameter

Method for setting the parameter value

Parameter description

Representation

Default value

Value range

1

The Purpose
field

NA

Provides an

52

Purpose

—

Provides information about the use of the video stream

String

Depends on the video stream designated 's selected purpose

Many Latin and Cyrillic characters, numbersdigits

532

Resolution**The Resolution**
drop-down list

Select the value from the list

Sets the video stream frame resolution

List of supported resolutions of the video image frame resolutions

Standard

• Standard;
• High;
• Full.

Particular Specific values depend on the camera model

SpeedThe Rate**
field of allowable values

Enter the value in the field

Sets the frame rate of the video stream

Frame rate in FPS

258

Depends on the capabilities of the used camera

55

Codec**

Select the value from the list

Sets the technology used to encode and decode the video stream

List of supported codecs

Depends on the camera model

Depends on the camera model

56

Key frame rate**

Enter the value in the field

Sets the key frames rate

Sequence of numbers

8

Depends on the capabilities of the camera

57

Video quality**

Set the slider in the required position

Sets the frame quality

—

Maximum

Min—maximum compression and minimum video signal quality

Max—minimum compression and maximum video signal quality

This checkbox should be set if the purpose is not specified for the configured stream but it is used for recording on a macro or a script

Set—if the stream purpose isn't specified, the stream is in the sleep mode and it cannot be used for recording on a macro or a script

Clear—if the stream purpose isn't specified, it can be used for recording on a macro or a script

Sets the checkbox if the purpose isn't specified for the configured stream, but it is used for recording by a macro or a script

Set—if you don't specify the stream purpose, the stream is in the "sleep" mode, and you cannot use it for recording by a macro or a script

Clear—if you don't specify the stream purpose, you can use it for recording by a macro or a script

The Codec**
drop-down list

Select the value from the list

Sets the technology used to encode and decode the video stream

List of supported codecs

Depends on the camera model

Depends on the camera model

6

The Key frame rate**
field of allowable values

Enter the value in the field

Sets the key frame rate

Sequence of numbers

8

Depends on the capabilities of the used camera

7

The Video quality**
slider

Set the slider in the position

Sets the frame quality

NA

Maximum

Min—maximum compression level and minimum video signal quality

Max—minimum compression level and maximum video signal quality

Any valid unused port numbers.

The number of ports is determined by the system administrator