Page History

The following typical interface objects are in use for monitoring of security intercom terminalused to monitor the emergency intercom terminals:

1. Display – displays —displays components of the user interface which are in use for security used to monitor the emergency intercom terminals;
2. Monitor – displays —displays a video from the video camera of security intercom terminals while callingthe emergency intercom terminal during the call;
3. Audio player – records and playbacks —used to record and play back audio signals from the operator and/or SIP - device.

Configuration of To configure the Axxon PSIM typical interface objects in the Axxon PSIM software is performed as follows:

...

...

, do the following:

1. Create the Display object on the intercom subsystem server.
   

   Note
   title Attention!

...

1. The Display 4321, Monitor 4321 and Audio player 4321 names are reserved for the objects

...

1. that are

...

1. used to view the archive by calls from the

...

1. Reports wizard for

...

1. emergency intercom

...

1. terminals window (see the

...

1. Reports log).

...

1. To avoid the incorrect system operation, we don't recommend using these names during the typical interface objects configuration

...

1. .

Create the Display object on the Intercom Subsystem Server. On
2. On the settings panel of the Display object, set the checkbox
close
3. next to
a Client
4. the client for which this object
will be
5. is available.
On
6. Create the Monitor object on the basis of the Display object,
create the Monitor object on which
7.  which displays a video from the
video
8. camera of
security intercom terminals while calling will display. Add video cameras which are to be monitored to the List table
9. the emergency intercom terminal during the call. 
10. Add cameras of emergency intercom terminals to the table that you want to monitor.
    Image Modified
11. Create the Audio player object on the basis of the Display object.
12. From the drop-down list in the
Name
13. Number column, select
the
14. the Microphone object
corresponding to the Client microphone for which the Display object is available. Then select Microphone objects corresponding to
15. numbers, or in the Microphone column, select the Microphone object names corresponding to the physical and virtual microphones of all SIP
-
16. devices connected to the
Intercom Subsystem Server.

17. intercom subsystem server.
18. The Microphone, Audio card, Computer fields are filled automatically.Image Modified

...

Configuring the Axxon PSIM typical interface objects is complete.