Page History
To configure receiving eventsthe events receiving, do the following:
- By default, the Android Mobile Client gets events from the Server. Disable auto updates the Server events in the specified time period. To stop the events auto updating, disable the corresponding parameter in order not to get events (1).
- Select the autoupdate interval for events: 5 seconds, 10 seconds or 1 minute (2).
To disable the images display in push notifications, disable the Show images parameter (3).
Info title Note It is possible to receive push notifications from the Server in case the alarm event on camera is detected.
To enable the push notifications receiving, For proper operation of push notifications perform the following actions in the direct order:
Note title Important! To receive push notifications from the Axxon Next Server, connect this Server to the AxxonNet cloud service (see AxxonNet Setup and Operation).
The push notifications from Axxon Next Server can be sent to mobile devices automatically and manually when initiating an alarm event:
- To send push notifications automatically, it is necessary to configure the corresponding macro to initiate an alarm event on the detector (see Trigger an alarm).
- Manual alarm event initiation (see Manual Initiation) also initiates sending push notifications to mobile devices.
Info title Note Push notification is sent only when the alarm on camera is detected. If there are no push notifications,
restart the Android device
Select the autoupdate interval for events (3).Note title Attention! Push notifications can be received for the AxxonNet Server only and the connection to AxxonCloud is to be performed (see AxxonCloud Setup and Operation).
.
In the Notifications period parameter (4) set the time period within which the repeated triggerings of the same camera will be ignored:
None (all push notifications will be received);
5 seconds (default);
10 seconds;
1 minute.
Info title Note After changing the Notifications period parameter value, it is necessary to restart the Android device.
The events receiving in Android Mobile Client is now configured.