Unable to render embedded object: File (books.jpg) not found.
Go to documentation repository
Page History
...
| Info | ||
|---|---|---|
| ||
The default value of the Friendly name parameter is as follows: AXIS <model name> - <mac address>, where <model name> is the model of the Axis IP device and <mac address> is its MAC address (for example, AXIS 214 - 00408C7D2610 |
...
Axxon Next can access the following video streams from Axis IP devices:
1. H.264/MJPEG video
2–5. Streams matching the Quality, Balanced, Bandwidth, and Mobile profiles. These profiles are configured via the camera's web interface.
In Axxon Next, the Quality profile corresponds to stream 1. Auto, Balanced is stream 2. Auto, Bandwidth is stream 3. Auto, and Mobile is stream 4. Auto (see The Video Camera Object).
Stretch video capture сards
If a Stretch VRC6004, VRC6008, VRC6404HD, VRC6416, VRC7008L, or VRC7016LX video card is installed, the choice of incoming video signal (PAL or NTSC) is made automatically, based on the video cameras connected to the card. Changes to this setting do not affect operation of the card.
...
| Info | ||
|---|---|---|
| ||
Axxon Next does not support receiving uncompressed video from WS-216 video capture cards.
For video cameras that are connected through WS-216 video capture cards, you can choose one of the two codecs for a video stream:
1. H.264 (configurable) 2. H.264 (minimum resolution, non-configurable) |
IP devices which partially support the ONVIF protocol
To connect IP devices which only partially support ONVIF functions to the Axxon Next software package, you must use an ONVIF driver (1) with compatibility mode enabled.
| Info | ||
|---|---|---|
| ||
Such video cameras include Hikvision models and early versions of firmware from Sony, Samsung, and others. |
...
Sony IP Devices
Some Sony models support encoding of the video signal in two formats simultaneously. To use this option you must perform the following steps:
...
Overview
Content Tools