Unable to render embedded object: File (books.jpg) not found.
Go to documentation repository
Page History
...
- If the frame resolution is smaller than the LPR channel requires, it is up-scaled to the required size.
- If the frame resolution is larger than the LPR channel requires, it is down-scaled to the required size.
| Info | ||
|---|---|---|
| ||
While using full resolution, the Reduce large resolution checkbox should be necessary checked, otherwise unwanted «rake» effect may be observed. |
...
- If the frame resolution is smaller than the LPR channel requires, it is up-scaled to the required size.
- If the frame resolution is larger than the LPR channel requires, it is processed as it is (with no down-scaling).
...
| Info | ||
|---|---|---|
| ||
Frame processing setup is given only when Auto-Uragan 3.5.0.29, CARMEN-Parking, CARMEN-Auto, ACCR or VIT program module is used. |
To set the frame processing, do the following:
- In the System Settings dialog window, open the Hardware tab (1).
- In the object tree of the Hardware tab, select the LPR channel, corresponding to the activated Auto-Uragan 3.5.0.29, CARMEN-parking, CARMEN-Auto, ACCR or VIT program module (see Activating the program module, used for identifying the plates section, 2).The settings panel of the selected object will open on the right side of the window.
- Check or uncheck the Reduce large resolution checkbox (3).
- Click Apply (4).
...
Overview
Content Tools