Versions Compared

Old Version 2

changes.mady.by.user Lyubov Kasyanova

Saved on

compared with

New Version Current

changes.mady.by.user Roman Nazarov

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

To configure the MicroTrack II control segment go to the settings panel of the MicroTrack II Segment object. This object is created on the basis of the MicroTrack II object on the Hardware tab of the System settings dialog window.

Image Removed

To configure the MicroTrack II control segment, do the following:

  1. Go to the MicroTrack II Segment object’s settings panel.
    Image RemovedImage Added
  2. In the Beginning: field using  field (1) using the up-down buttons enter the number of subcell corresponding to the key point in which the control segment started (1).

  3. In the End: field using  field (2) using the up-down buttons enter the number of subcell corresponding to the key point in which the control segment finished (2).

    Info
    titleNote.
    The range of values of Beginning and End fields is from 0 to 215. It is not recommended to cross for the control segments to overlap one another.


    Note
    titleAttention!
    Value in the End field should not exceed the value in the Beginning field.


  4. In the Timeout field (3) set the interval, after which the alarm will be activated.
  5. In the Control AIM : select an AIM security detectorfield (4) select alarm input of the AIM II controller, which the trigger the alarm at a given interval.
  6. In the Timeout: set the interval, after which the alaram will be activated. the Alarm fix cause table (5) specify up to 10 alarm descriptions, one of which can be selected by an operator when processing the alarm of a MicroTrack II segment on the map (see Managing MicroTrack II and MicroPoint II control segments).
  7. Click Apply button (6).

Configuring the MicroTrack II control segment is completed.