Page History

...

1. Create the Virtual access server object on the basis of the Computer object in the Hardware tab of the System settings dialog window.
   
2. Create the FACE Access access point object on the basis of the Virtual Access Serveraccess server object.
   
3. Configure the FACE access point:
   Image Added
4. Select camera which performs the face recognition. Camera must work with the face recognition server (1).Image Removed
5. Select the face recognition server on the basis of which the access point is to be organized (2).
6. From the Entrance to: drop drop-down list select the Region object corresponding to the area in which access is performed (3).
7. From the Exit from: drop drop-down list select the Region object corresponding to the area from which the exit is performed (4).

8. Select the Only recognition mode if it’s required to take a decision about access granting only with reference  to faces recognition (4). Select the Access rights checking mode and set checkboxes corresponding to checking which are to be performed if it’s required to check the user access level which face was recognized, time zones of this access level and perform additional checking.
   Locking checking – access will not granted in case of user is locked.
   Antipassback checking – antipassback checking through the access point.

   Info
   title Note.
   Checking of access level and its time zones will be always performed in the Access rights checking mode.

9. From the Control drop-down list (5) select the access granting mode:
   • Server decides - the server makes the decision for access granting or refusal (this includes the use of a script).
   • Operator decides - the operator makes the decision for access granting or refusal using the Event Manager module (see Working with the Event manager module). If this mode is selected, the following settings become available:
     Image Added
     
     • Timeout - sets the time interval in seconds to wait for access confirmation by the operator. All the other requests from the Face recognition server will be ignored within the specified timeout.
10. If the Server decides access granting mode was selected, then from the Mode drop-down list (6) select the access rights checking mode:
    • Recognition only - the server makes the access granting decision based only on face recognition.
    • Rights checking - the server makes the access granting decision after successful face recognition and successful verification of user access rights (access level, time zones, blocking, antipassback). If this mode is selected, the following settings become available:
      Image Added

      • Check date of begin and Check expiration - sets the mode of checking the access card validity:

        • Do not check – do not check the start or expiration date of the card.

        • Do not include – do not include the start or expiration date of the card in the check.

        • Include – include the start or expiration date of the card in the check.

      • Check blocking – set the checkbox to check if the user is blocked.

      • Check AntiPassBack – set the checkbox to control double pass.

    • Temperature monitoring - if it is required to only monitor the face temperature (see Face temperature monitoring and control).
    • Temperature control - if it is required to only control the face temperature threshold exceeding (see Face temperature monitoring and control). If this mode is selected, the following settings become available:
      Image Added
      
      • Lock user on temp. alarm - set the checkbox if it is necessary to automatically block the user when the temperature is exceeded (the User blocked - Yes parameter will be set in the Access Manager module). If the joint operation with the ACS and dynamics are enabled, then such a user will be automatically removed from the controller and therefore will be denied access.
11. Click Apply button (7)

12. In the Validity date section select a radio button corresponding to the settings of checking the card validity date specified in the Visitor Management System interface object (6).
    Do not check – checking of card validity date is not required.
    Not included – do not include the card expire date to checking.
    Included – include the card expire date to checking.

Click Apply to save changes.

Organizing of virtual access point while face recognition is performed.