Go to documentation repository
Page History
The Voice message serviceMessage Service is designed used for registration of the program module, which which supports transmission of voice messages through over the telephone lines. This service provides automatic redial of pre-defined the specified telephone numbers and playback of the audio files.
The settings panel of the Voice message serviceMessage Service object is shown in the figure.
Table describes the setting parameters of the settings corresponding to the elements of the settings panel of the Voice message serviceMessage Service object.
№ | Parameter | Method for setting the parameter value | Parameter description |
Representation | Default value | Value range | |
1 | Identification number* | Automatically | Displays the identification number of the Voice |
Message Service object in the digital |
video surveillance system |
Sequence of numbers
-
with the distributed architecture | Numbers, letters, periods, hyphen, dash and underscore | - | Depends on the number of the Voice |
Message Service objects in the digital |
video surveillance system with the distributed architecture | ||
2 | Name* | Enter the value |
into the field | Displays the name of the Voice |
Message Service object in the digital |
video surveillance system |
with the distributed architecture | Latin, Cyrillic and service characters | Voice |
Messages Service | A line containing a sequence of any |
characters (letters, digits, service characters |
except > and < |
characters), |
case- |
insensitive Number of |
characters—from 1 to 60 |
3 | Disable |
Is identified by the check mark
Set the checkbox | Sets the state |
(enabled or disabled) of the Voice |
Messages Service object in the digital |
video surveillance system |
with the distributed architecture | Boolean type |
Not available
Clear | Set—the Voice Message Service object is disabled and isn't used Clear—the Voice Message Service object is enabled and used |
Yes – the Voice message service is disabled and is not in use
No – the Voice message service is enabled and is in use.4 | Computer |
Select the value from the list |
Sets the Computer parent |
object of the digital system with the distributed |
architecture, to which the given Voice |
Message Service object belongs | Name of the Computer objects registered in the system |
Name of the Computer parent |
object | Depends on the number of the Computer objects in the digital |
video surveillance system with the distributed architecture | ||||||
The Settings | ||||||
group | ||||||
5 | Modem | |||||
Select the value from the list |
Sets the voice modem used for transmitting the voice messages |
Name of the voice modem registered |
in Windows OS |
Not defined | Depends on the number of the connected voice modems |
6 | - |
Click the button |
All connected |
devices are scanned to identify the voice modems and |
put them in the Modem list | - | - | - |
7 | Dialing (pulse/tone) |
Is identified by the check mark
Set the checkbox | Sets |
number dialling mode: pulse or tone |
Boolean type |
Not available
Clear | Set— |
tone dialling |
Clear—pulse dialling |
8 | Redial attempts | Enter the value |
into the field |
Sets the maximum number of redial attempts to establish a connection |
Sequence of numbers | 5 | From 1 to 10 |
(recommended |
—from 1 to 5) |
9 | Pause between redial attempts | Enter the value |
into the field |
Sets a length of a pause between redial attempts |
from | 3 | Recommended |
—from 30 to 120 |
10 | Wait for tone signal |
Is identified by the check mark
Set the checkbox | Enables the tone signal wait function before redialling the number |
Boolean type |
Set |
Set—waiting for a |
tone signal before number redial is required |
Clear—waiting for a |
tone signal before number redial |
isn't required |
*The name Name of the element is not isn't displayed in the settings panel of the given object.
Overview
Content Tools