Page History

As a rule, IP devices allow processing one or more video signals depending on the type of the device in use.

Every IP device used for video input is registered in INTELLECT™ software  by Intellect by creating and configuring the Video Capture Devicecapture device object. The The Video Capture Devicecapture device objects are created in the Hardware tab under on the basis of the Computer object.

Image Modified

When the Video Capture Devicecapture device objects are created, the following parameters are to must be set for every IP device:

1. In From the Type drop-down list (1), select the IP device Vendor and codec used by this device.

   Info
   title Note
   Codec is specified in brackets. If the codec is not specified, then MJPEG is set by default.

   vendor.

2. If the model and firmware should be detected automatically, go to step 3. The Model and Firmware fields will be filled in automatically after the connection settings are applied.
   To select the model and firmware manually, do the following:
   

   1. From the Model drop-down list (2), select the

   In the Model list select

   1. IP device model.

      Info
      title Note

   .

   1. If the required model is not in the list, it is not integrated. Consider connecting IP device via one of the standard protocols.

   In

   1. 
      

   2. From the Firmware drop-down list (3), select the firmware on the device.
3. In the IP address field (4), specify the assigned network address of assigned to the IP device. Information on how to assign IP addresses is given in Assigning network addresses to IP devicessection.

4. In the Port field (5), specify the port number (TCP/IP) used for video transmission

   .

   .

   Info
   title Note
   In some cases you might also need to specify the RTSP port—see Features of configuring ONVIF or Hikvision IP devices behind NAT.

   
   

5. To log in the Web server of the IP device, enter Specify the corresponding data in the Name and Password fields to log in Web server of IP device(6).

6. If

   the parameters set

   you want to use the settings configured with the help of the Web server or another software of the IP device

   are to be used

   ,

   then

   set the Use device settings checkbox (7). In this case, the overlapping settings configured on the settings panel of the Camera object will be ignored.

   Info
   title Note
   If video camera settings specified with the help of the IP device software are not used in

...

1. Intellect or used partially, then

...

1. clear the Use device settings checkbox

...

1. and configure a video camera on the settings panel of the Camera object.

   
   

2. Click the Apply button.

After logging in INTELLECT™ Intellect, the values corresponding to the numbers of the connection channels of the video cameras to the IP device are to should be given to the Chanel Channel number parameters of the Camera object.