Page History

To set up the LPR channel, specify the main camera for LP number recognition, and an additional synchronous camera, if necessary.

The main recognition video camera is directed at the driving lane. The additional video camera covers the same area as the main video camera, but it can be mounted in another place. The two video cameras can be controlled synchronously using scripts or macros.

...

To select the video cameras, do the following:

1. In the System Settings dialog window, open the Hardware tab.
2. Select the LPR channelGo to the LPR channel object settings panel, corresponding to the activated Auto-Uragan, CARMEN-parking or CARMEN-Auto module, in the objects tree on the Hardware tab module (see Activating the program module, used for identifying the plates section). The settings panel of the selected object will open on the right side of the window.
   Image Modified

3. Select a Camera object in From the License plates recognition field ( drop-down list (1), select a required Camera object (the main camera for LP number recognition) (3).

   Info
   title Note
   The same camera can be used for various LPR channels.

   
   

4. Select a Camera object in the Synchronous pickup field (From the Synchronous pickup drop-down list (2), select a required Camera object (the additional synchronous camera) (4).

   Note
   title Attention!
   Frames recording from the synchronous video camera is performed only if permanent record by both video cameras is performing.

   
   

5. Click the Apply button (3).

The camera selection is completed.