Page History

...

Configuring the VEGA Access and VEGA III cameras by

...

Configuring of these cameras is the Tattile manufacturer is performed the following way:

...

After the required settings are performed, create and configure the corresponding objects in the Auto-Intellect software package:

1. Go to the Hardware» tab  tab of the Settings dialog box of the Auto-Intellect software. Create the Video Capture CardDevice on the base of Computer object. In the right part of Hardware tab the settings panel will display.
   
2. Select the type of configured camera in the Type drop-down list (1).
3. Enter the IP address of connected device in the IP address field (2).
4. Enter the number of port in the Port field (3). Default number of port is 31000.
5. To save changes click the Apply button (4).

For working of To enable the remote identifier operation, do the following:

1. Create the Embedded detector object on the base of Camera ongect. Enter the anpr-detector value in the id in device form field. 
   
2. To save changes click the Apply button.

...

Configuring of VEGA Access and VEGA III cameras by Tattile manufacturer for working with the Auto-Intellect software package is completed.

...