Page History

...

There is a possibility It is possible to form a search query:

1. By eventsrecognized vehicles;
2. By alarms.

Creating the search query by

...

vehicles

Creating To create the search query by events is done in vehicles, do the following way:

1. Go to the tab the Search by eventsvehicles tab.
   

2. From the Search operation list (1) select a logical construction, used for uniting several elements of the key phrase, corresponding which correspond to numbers of the vehicle, the LP numbers or their parts that are being searched:2.1 and

   1. AND – for searching by numbers, containing all the elements of the key phrase;

   2.2 or

   1. OR – for searching by numbers, containing at least one element of the key phrase

   . InfotitleNote

   1. .

3. For example, search query '[a-m]3_2 and 02' may return events with numbers 'a302mm63', 'a312mm02'.

   In the field In the Vehicle's numberslicense plate (2) field, enter the key phrase, consisting of one or several comma separated elements, corresponding to the plates 'numbers that are being searched. The elements of the key phrase can be separated by comma "," or semicolon ";".

   Info
   title Note.
   The key phrase may include usual characters and picture-characters in the required combination.

   
   

   Picture-characters	Description of Picture-characters	Example of search query
   %	Any string in length from zero and more characters	Search query

   '

   а%385%78

   '

   returns LP numbers, containing the elements 'а', '385' and '78', divided by any number of characters, for example 'АО38578', 'а385mk78'
   _ (underlining)	Any single character	Search query

   '

   2__5

   '

   returns LP numbers, containing the sequence of four characters, the first of which is '2', the last one is '5',for example, 'А256577', '2115ОК43'
   []	Any single character

   , that is contained in

   within the range ([а-е]) or in the set ([

   абвгде

   abcde])

   Search query

   '

   [е-м][2-5]53

   '

   returns LP numbers, containing the sequence of four characters. The sequence ends in '53', the first character belongs to the range е-м, the second one belongs to the range 2-5, for example, 'k453mn02', 'm253bt63'
   [^]	Any single character

   , that is not contained in

   outside the range ([^а-е]) or

   in

   the set ([

   ^абвгде

   ^abcde])

   Search query

   '

   [^е-м]499

   '

   returns LP numbers, containing the sequence of four characters. The sequence ends in '499', the first character does not belong to the range е-м, for example 'b499bk57', 'n499578'

   
   

4. Set the checkbox Plate the License plate not recognized checkbox (3) if it is necessary to display all the numbers (3).

   Info
   title Note.
   Selection on one checkbox Plate of the checkbox License plate not recognized is active enabled only with if the OR logical construction selection OR is selected in the Search operation dropdown list.

   
   

5. Set the Recognized partially Partly recognized checkbox if it is necessary to display partially recognized numbers (4).
6. Set the 'Space' in car number checkbox (5) if it is necessary to display the numbers that contain a space between the characters.
7. Set the Acceptable error amount check box (6) to display the numbers with the errors (character mismatches), the amount of which is indicated in the (7) drop-down list.
8. In the Regional code In the Plate region group set the checkboxes for those regions, which events regional codes events for which should be returned while being searched (58).
9. In the Regional code LP region group set the checkboxes for those regional codes events for which regions, which events should be returned while being searched (69).
10. In the LP colors group select color of regional code and basic color of the license pplate plate (710). 
11. In the Date/time group (8, 911) set the time boundaries range within which the required events have been registered. On default these boundaries are By default this range is not activated (checkboxes from and to are disabled). To activate the boundaries it is necessary to , set the checkboxes From and/or To and then click Image Removed button (8-9 Image Added button (11) and in the appeared calendar set the required date. Enter the required time in the field From and/or To. In case, if If only upper or bottom boundary is selected, the search query will return the events, having been registered before or after the set deadline correspondingly. To disable the search by data date and time one should , uncheck From and To checkboxes.

12. In the License plate Plate recognizers group (1012) set the checkboxes for those plate recognizers, which events are to be returned while being searched.

    Info
    title Note.
    On By default, information about objects removed from the Intellect software package is not displayed in the Plate recognizers group. Select Show deleted in the View menu of the Event search in the Recognizers DBs main window to search by removed servers of plate recognizers. Image Removed   After this all removed servers of plate recognizers will be displayed in the Plate recognizers group. Set checkboxes for those plate recognizers which will be used while being searched.

    Image Added

13. From the list Registered speed (1113) select the required filter of vehicle 's speed and then in the activated field(fieldss) (1214) enter the threshold value(valuess) of vehicle 's speed.
    The following speed filters are available:
    
    1. No matter – events of the vehicle, moving with any speed will be returned.
    2. More – events of the vehicle, moving with a speed, exceeding a single threshold value, will be returned.
    3. Less – events of the vehicle, moving with a speed, not exceeding a single threshold value, will be returned.
    4. Interval – events of the vehicle, moving with a speed, belonging to a single entered threshold value, will be returned.
14. From the Direction list (1315) select the required filter concerning the direction of the vehicle. The following direction filters are available:
    1. No matter – events of the vehicle, moving in any direction concerning the LP recognizer's camera will be returned.
    2. Undefined – events of the vehicle, which direction could not be defined, will be returned.
    3. From the camera – events of the vehicle, moving away from the LP recognizer's camera will be returned.
    4. To the camera – events of the vehicle, moving to towards the LP recognizer's camera will be returned.
    5. To the right  – events of the vehicle, moving to the right of the LP recognizer's camera will be returned.
    6. To the left  – events of the vehicle, moving to the left of the LP recognizer's camera will be returned.

15. In the Countries group (

    14

    16) set the checkbox for the country, which events should be returned while being searched.

    Note
    title Attention!
    Only the countries whose license plate numbers have already been recognized earlier are displayed in the Countries group, since the information about the countries for this filter is taken from the recognized plates database.

    
    

16. From the list Search operation (1517) select a logical construction, used for uniting several elements of the key phrase, corresponding to numbers of the vehiclecomments, that are being searched:
    1. and – for searching by numberscomments, containing all the elements of the key phrase;
    2. or – for searching by numberscomments, containing at least one element of the key phrase.
17. In the Comment field (1618) enter the key phrase, containing one or several comma separated elements, corresponding to the comments to the events, that which are being searched, and which were specified in the Online monitor window (see Adding comments to the events).

18. Set the Blank comment checkbox in case if the event that is being searched can be left uncommented (17 Empty comment checkbox to include the uncommented events in the search (19).

    Info
    title Note.
    The selection of this the Blank comment checkbox is active enabled only with if the OR logical construction selection OR is selected in the dropdown list Search operationdropdown list..

    
    

19. From the Validity list (1820) select the required Validity filter and then in the activated field(fieldss) (1921) and enter the threshold of Validity value(valuess) in percent. The following Validity filters are available:
    1. No matter – events of the vehicle, which numbers have been recognized with any validity.
    2. More – events of the vehicle, which numbers have been recognized with validity, exceeding the entered threshold value in percent.
    3. Less – events of the vehicle, which numbers have been recognized with validity, not exceeding the entered threshold value in percent.
    4. Interval – events of the vehicle, which numbers have been recognized with validity, belonging to the entered threshold value in percent.
20. In the Recognition cameras field (22) set the checkboxes for the cameras, which events should be returned while being searched.

Creating the search query by events is completed.

After creating the search query one should , run its processing (see section Query launching).

Creating the search query by alarms

Creating To create the search query by alarms is done in , do the following way:

1. Go to the Search by alarms tab.
   Image RemovedImage Added
2. Repeat steps 2-14 12 of the section Forming the search query by events as applied to interface elements of the tab Search by alarms (1).

3. In the group External databaseDB (2) set the checkboxes for those external databases, which events have to be returned in search query results.

   Info
   title Note.
   This setting is relevant in case, when enabled if the checkbox Plate number is found in the DB is set in the group Alarm type group (see step 9).

   
   

   Info
   title Note.
   The External database group contains a list of all the databases that have ever been used together with the Vehicle Tracer module but, on by default, databases removed from the Intellect software package are not displayed in the list. Select the Show deleted in the View menu of Event search in the Recognizers DBs» main window to search by removed servers of plate recognizers.  Image Removed  As  As a result, all external databases removed from the system will be displayed in the list. Set checkboxes for those databases which will be used while being searched.

   Image Added

4. From the Permitted speed list (3) select the required speed filter, permitted on the controlled road area and then in the activated field(fieldss) (4) enter the threshold speed value(valuess) in km/h.

   The following filters of the permitted speed are available:

   4.1 No matter – events of the vehicle, registered on the road area with any permitted speed will be returned.

   4.2 More – events of the vehicle, registered on the road area with any permitted speed, exceeding the entered threshold value will be returned.

   4.3 Less – events of the vehicle, registered on the road area with any permitted speed, not exceeding the entered threshold value will be returned.

   4.4 Interval – events of the vehicle, registered on the road area with any permitted speed, that belong to the entered threshold value range will be returned.

5. From the list Alarm handling delay, sec (5) select the required filter according to the alarm handling delay and then in the activated field(fieldss) , (86) enter the threshold value(valuess) of delay time in seconds.
   The following filters of alarm handling delay are available:
   5.1 No matter – alarms, accepted in any time after being registered or unaccepted at all.
   5.2 More – alarms will be returned, accepted with a delay, exceeding the entered threshold value.
   5.3 Less – alarms will be returned, accepted with a delay, not exceeding the entered threshold value.
   5.4 Interval – alarms will be returned, accepted with a delay, belonging to the entered threshold value.

   Info
   title Note.
   This setting is relevant in case enabled if from the Alarm processed list the value values No matter or Processed is selected (see step 6)are selected from the Alarm processed list.

   
   

6. From the list Alarm processed (7) select the required filter according to the alarm processing factor:
   6.1 
   1. No matter
    —both
   1.  — both processed and unprocessed events will be returned.
   6.2 
   1. Alarm is not processed — only unprocessed events will be returned.
   6.3 
   1. Alarm processed — only processed events will be returned.
   1. In the Alarm accepted by group (8), set the checkboxes for the operators who received the alarm events to display these events in the search query.

   2. In the Alarm type group (9), the group Alarm type (8) set the checkboxes for those the alarms, which have to be returned in results of search query:7.1 No matter — alarms will be returned with any alarm type or with the absence of it.
      7.2 Alarm set by operator — alarms will be returned, triggered manually.
      7.3 Entered the oncoming lane

      1. Stop over stop line — events will be returned for which stopping over the stop line at the stoplight has been registered.

      2. Entered the oncoming lane — events will be returned for which entering the oncoming lane has been registered.

      3. Parking violation — events will be returned for which

      entering the oncoming lane

      1. the violation of parking rules has been registered.

      7.4 

      1. Marking rules violation — events will be returned for which the violation of marking rules has been registered.

      2. LP found in database — events will be returned which plates have been found in the external database.

      7.5 Running a red light —

      1. Stop over crosswalk line - events will be returned for which

      running a red light

      1. stopping over the crosswalk line at the stoplight has been registered.

      7.6 

      1. Overspeeding — events will be returned for which overspeeding has been registered.

      7.7 Stop over crosswalk line -

      1. Running a red light — events will be returned for which

      stopping over the crosswalk line at the stoplight

      1. running a red light has been registered.

      7.8 Stop over stop line

      1. Running a red light at crossroads — events will be returned for which

      stopping over the stop line at the stoplight

      1. running a red light at crossroads has been registered.

      2. Alarm is set by operator — manually triggered alarms will be returned.

   3. From the Search operation list (10), select the logical construct which is used to combine several elements of the key phrase, that correspond to the comments to the events to be searched in external databases:
      1. AND - to search for comments that contain all the elements of the key phrase;
      2. OR - to search for comments that contain at least one element of the key phrase.
   4. In the Comment from external DB field (11), enter a key phrase consisting of one or more elements, separated by commas, that correspond to the comments to the events to be searched in external databases that are specified in the External DB group (2) (see Creating the Active tracking database).

   5. From the Speeding list (127.7 Parking violation - events will be returned for which violation of parking rules has been registered.Form the Speeding list (9) select the required speeding filter and then in the activated field(fieldss) (613) enter the threshold value(valuess) of speeding in km/h.

      Info
      title Note.
      This setting is relevant in case, when enabled if the checkbox Speeding is set in the group Alarm typegroup (see step 89).

      
      

      Info
      title Note.
      The value of speeding is calculated as a difference between the fixed vehicle 's speed and the speed, permitted on the controlled area of the road.

      The following filters of the speeding are available:
      6.1 No matter – events of the vehicle, moving with any overspeeding or with the absence of it will be returned.
      6.2 More – events of the vehicle, moving with overspeeding, exceeding the entered threshold value will be returned.
      6.3 Less – events of the vehicle, moving with overspeeding, less than the entered threshold value will be returned.
      6.4 Interval – events of the vehicle, moving with overspeeding, in the entered range of threshold values, will be returned.

   6. From the Red light shows at, sec list (14) select the required filter for red light start and then in the activated field(s) (15) enter the threshold value(s) in seconds.

      Info
      title Note
      This setting is enabled if the checkbox Red light violation is set in the Alarm typegroup (9).

      The following filters of the running a red light are available:
      6.1 No matter – events of the vehicle, which violated a red light, will be returned.
      6.2 More – events of the vehicle, which violated a red light after the entered threshold value will be returned.
      6.3 Less – events of the vehicle, which violated a red light before the entered threshold value will be returned.
      6.4 Interval – events of the vehicle, which violated a red light within the entered range of threshold values, will be returned.

   7.  In the Alarm initiated by field (16) select the required operators who initiated the alarm. The corresponding alarms will be shown in the search results.

      Info
      title Note
      This setting is enabled if the checkbox Alarm is set by operator is set in the Alarm typegroup (9).

      
      

   Creating the search query by alarms is completed.

   After creating the search query one should , launch its processing (see section Query launching).