Page History

...

To detect a sitting pose, you have to should configure scene frame perspective first.

Please follow the steps belowTo do this, do the following:

1. Select a detection tool, and click Image Removed in the Image Added button in the preview window.

2. Set the size of the same human figure person in different areas of the FOV. To create a leveling rod, left-click on the video image to add two anchor points. You should set no less than at least three leveling rods. The size of the leveling rod height must correspond to a human figure placed in the same point of the sceneshould be about the average height of a person at this point in the frame. You can resize the rod by stretching its anchor points Image Removed, or move  Image Added. You can move it on screen by dragging and dropping.
   Image Modified

   Note
   title Attention!
   When setting up the leveling rods, please make sure that the following conditions are should be met: All rods have different height. All rods must be based on the same plane (for example, The rods that are located at the same distance from the video camera lens, should be of the same size. The feet of the rods should be located on the same surface (e.g. floor). In complex scenes where detection accuracy is crucial, we recommend you , it is recommended to add more than 3 rods three rods to increase the accuracy of the detection. In areas the parts of the frame where the picture is apparently distorted, place lens vertical distortion is observed, the rods in should be parallel to known the nearest vertical elements (doors, bookcases, etc. objects (e.g. door, wardrobe).

   
   

   Note
   title Attention!
   In For portrait-oriented scenes (such as store / warehouse aislescorridor, shopping aisle, warehouse aisle, etc.), set the arrangement of the rods in should form triangles. Image Modified

   
   

   Info
   title Note
   For your convenience,   you can click the Image Removed Image Added button to freeze the videoand configure the mask on a still frame. To unfreezeundo, click the this button once moreagain.

   
   

   Info
   title Note
   To delete a the rod, click the Image Removed button Image Added button.

   
   

3. Click the Apply button.

Configuring the Sitting person detection tool is complete.