Page History

The settings panel of the Videogate system object is shown in the figure.

Image Modified

Table The table describes the parameters of the settings corresponding to the elements of the settings panel setting parameters of the Videogate system object.

№

Parameter

Method for setting the parameter value

Parameter description

Symbols used

Representation	Default value	Value range
1	The Identification number* field	Automatically	Displays the identification number of the Videogate

object in the digital distributed video surveillance system.

system object

Sequence of numbers

-

NA

From 1 to 2147483647.

Depends on the number of the Videogate

objects

objects in the

digital distributed

video surveillance system with the distributed architecture
2	The Name* field	Enter the value in the field

Defines

Sets the name of the Videogate object in the

digital distributed

video surveillance system

.

with the distributed architecture

Latin alphabet, Cyrillic, digits and service characters

Archiver.

Videogate

A line containing a sequence of any

symbols

characters (letters, digits, service characters

apart from

except > and <

symbols

characters),

not

case-

sensitive

insensitive.

Number of

symbols –

characters—from 1 to 60

.


3	The Disable checkbox

Is identified by the check mark

Set the checkbox

Disables the Videogate object in the video surveillance system with the distributed architecture

Defines the condition of the Videogate object (enabled or disabled) in the digital distributed video surveillance system.

Boolean type

Not available

Clear

Set—the Videogate object

Yes – the Videogate

is disabled and

is not in useNo – the Videogate is enabled and is in use.

isn't used

Clear—the Videogate object is enabled and used

4

The Computer

Is selected

drop-down list

Select the value from the list

Defines

Sets the Computer parent

Computer

object for the given Videogate object

.

Name of the Computer objects registered in the system

Name of the Computer parent

Computer

object

.

Depends on the number of the Computer objects in the

digital distributed video surveillance

system
5	The All button

The

Click the button

is pressed.

Selection of

Selects all video cameras registered in the system for

transmitting

transmitting the video signals through the

video gate.

videogate

-

NA

-

NA

-

NA
6	The Range

The button is pressed.

Access

button

Click the button

Gives the access to the complex selection of

video

cameras for

transmitting

transmitting video signals through the

video gate.

-

videogate	NA	NA	NA
The Camera* table

-


7	The Number

list	Select the value

Is selected

from the list

Defines

Sets the number of the camera for

transmitting

transmitting video signals through the

video gate.

videogate

Sequence of numbers

-

NA	Depends on the number of

surveillance

cameras registered in the

digital distributed video surveillance

system
8	The Name

list	Select the value

Is selected

from the list

Sets the name of the

video surveillance

camera for

transmitting

transmitting video signals through the

video gate.

videogate

Name

Names of the

Camera objects

cameras registered in the system

-

NA	Depends on the number of

surveillance

cameras registered in the

digital distributed video surveillance

system
9	The Stream for archive

Is selected

list	Select the value from the list

Set

Sets the video stream

for

to record

of

the archive of the Videogate module

.

Names of streams transmitted by

Server

the server

-

NA	Depends on the number of

video

the streams

enabled

configured on

Server

the server
10	The Compression

list	Select the value

Is selected

from the list

Sets the level of video signal compression for transmitting

video signals

through the

video gate

videogate.

With

If the

given

value

there

is set, the additional consumption of

Server’s

the server resources

.

occurs

Sequence of numbers

-

NA	In order of

rising

increasing the compression level

0,1,2,3,4,5

(0 – without compression, 5 – maximum compression).

from 0 to 5.

0—no compression

5—maximum compression

11

The Compressor
list

Select the

11

Compressor

Select

value from the list

Specifies

Sets the

procedure

algorithm of the video stream compression

which is in use for

, used to recompress the video signal

recompression

when transmitting

video signals

through the

video gate. The value is to be selected in the Compression list if the compressor is specified.

videogate. If the compressor is specified, you must select the value in the Compression list

List of available

procedures

algorithms

-

NA	MJPEG, Motion Wavelet 3.5, MPEG4. If

the compression level is specified but Compressor is not selected, the MotionWavelet compressor is in use.

you select compression and don't select compressor, the Motion Wavelet algorithm is used
12	The fps field	Enter the value in the field	Sets the video signal frame rate for transmitting

video signals

through the

video gate.

videogate

Sequence of numbers

-

NA	No less than 0.01, but no more than the rate of the video signal digitized by the

Not more than digitizing of video signal by

video capture card.

Not less than 0.01.

For detailed information about determining the current video signal frame rates, see Frame rate settings

13

The Critical rate field

Enter the value in the field

Set

Sets the minimum permissible rate of the video signal

, when received by the Videogate

frame's arrival in the videogate to control the transmission of the video signal through the local

net.

network

Sequence of numbers

-

NA

Not

No more than the frame rate of the video signal

,

that is transmitted to the

Videogate

videogate
14	The Gate

list	Select the value

Is selected

from the list

Set

Sets the Videogate object from which the video signal from the selected camera

has to

must be transmitted to the given

Videogate

videogate.

Important

Note

title	Attention!

The selected Videogate object must differ from the configured one, otherwise there will be no video transmission via the

Videogate.

videogate

Name

Names of the Videogate objects registered in the system

Not defined

NA	Depends on the number of the Videogate objects

, registered

registered in the

digital distributed video surveillance

system
15	The Backup archive

list	Select the value

Is selected

from the list

Set

Sets the

object

Backup archive object, from

which archive

which the archive from the selected camera

has to

must be transmitted to the given

Videogate.

videogate

Name

Names of the Backup

archive

archive objects registered in the system

.

Not defined

NA	Depends on the number of the Backup archive objects registered in the

digital distributed video surveillance

system

.


16	The Store no more than (hours) field

Video

Is identified by the check mark

Set the didsk

Enter the value in the field	Sets the time period in hours, after which you must delete the recordings of the corresponding camera from the videogate	Sequence of numbers	NA	>0
The Discs for storing video archives* table
17	The Video checkbox	Set the checkbox	Sets the disk for storing the archive of the video signals

, going through ther Videogate.

transmitted through the videogate

Boolean type

-

Clear

Set—the

Yes – the

disk is used for storing the archive of the Videogate module

.

No –

Clear—the disk

is not

isn't used for storing the

Video gate

archive of the Videogate module

17

18

The Disk
list

Automatically

Displays the names of the local (

net

network, USB) disks

, accessible

available for storing the archive of the Videogate module

.

Names of available

Available disks (Latin characters)

List of available hard disks

NA

Depends on the total number

(both local and network) of accessible disks.

of the available disks
19	The GB list

18

GB

Automatically

Contains

Displays the information about free space on every available disk

.

Disk space in GB

-

NA	Depends on the amount of free disk space

19

The Settings of recording to archive group
20	The Constant recording checkbox

Setting

Set the checkbox

Enables

permanent

constant recording on all

video

cameras added to the

Videogate.

videogate

Boolean type

No

Clear

Set—constant

Yes – permanent

recording is enabled on all

video

cameras added to the

Videogate.No – Videogate module archive is recorded only on

videogate

Clear—recording is enabled on the cameras that are

configured for archive recording on Server.

recorded on the server
21	The Active cameras checkbox	Set

20Active cameras recordingSetting

the checkbox

Enables recording only on

cameras requested (displayed) on clients.BooleanNoYes – Videogate module archive is recorded only on cameras

the cameras the video stream from which is requested and displayed on the video surveillance monitor

Boolean type

Clear

Set—recording is enabled on the cameras, the video stream from which is requested (displayed) on

clients.No – Videogate module archive is recorded on

the video surveillance monitor

Clear—recording is enabled on the cameras that are

configured for archive recording on Server.

recorded on the server

*The name Name of the element is not isn't displayed in the settings panel of the given object.

Page tree

Versions Compared

Old Version 2

New Version Current

Key